Toshiba DK424I 用户手册

This program assigns a station as the Message Center. 

Each digital, electronic and standard telephone can receive a maximum of four message waiting 
indications per [PDN] and each [PhDN] owned by the station. One of these four is reserved for the 
designated Message Center. The Message Center should be the customer’s main answering 
position.

Typically, the Message Center is a voice mail device, attendant console, a digital or electronic 
telephone with a DSS console (DDSS or HDSS), or an add-on module. If incoming traffic to a 
DDSS or HDSS console attendant is heavy, another station can be assigned as the Message Center.

●

The Message Center is allowed to perform “Message Waiting,” even if disallowed on all other 
stations.

●

Assign the Message Center to the customer’s main answering position: a station or the lowest 
port (in VM group) of the customer’s voice mail device (see Program 31 for voice mail group 
port assignments), whichever the customer specifies.

●

When using RS-232 SMDI or DTMF voice mail interface, all stations must also be assigned to 
the message center port in Program 

32 and Program 13. This should be the lowest standard 

telephone port (QSTU2/KSTU2/RSTU2) connected to the VM device. This is also the same 
(lowest) port assigned in the Program 31 VM group and the lowest standard telephone port 
assigned in the Program 

40 VM Distributed Hunt Group. Do not assign the VM DH Group 

port number (900~915) as the message center port.

✱  ✱  ✱ ✱  6SNU   +ROG  6SNU 

+ROG  6SNU   +ROG  6SNU   +ROG

SELECT = 1

SELECT 6~9 are not used.

PORT = Station Logical Port Number

Enter the station logical port number of the station 
to be defined as the Message Center.

For RS-232 SMDI and In Band (DTMF) voice mail 
integration, enter the lowest QSTU2/KSTU2/
RSTU2 standard telephone port connected to the 
VM device (see notes below.)