用户手册目录1.0 General171.1 Introduction171.2 Glossary171.3 Caution172.0 Outline of the Drive193.0 Fixed-disk Subsystem Description213.1 Control Electronics213.2 Head Disk Assembly213.3 Actuator214.0 Drive Characteristics234.1 Formatted Capacity234.2 Data Sheet234.3 Inquiry Information244.3.1 Product ID244.3.2 World Wide ID - Block Assignment244.4 Cylinder allocation254.5 Performance characteristics264.5.1 Mechanical positioning274.5.2 Drive ready time294.5.3 Spindle stop time294.5.4 Data transfer speed294.5.5 Buffering operation (read ahead/write cache)295.0 Data Integrity315.1 Equipment Status315.2 Error Recovery Procedure316.0 Physical Format336.1 Shipped Format (P-List)336.2 Reassigned Format (G-List)337.0 Electrical Interface357.1 FC-AL Connector357.1.1 40 pin SCA-2 SFF-8045 FC-AL Connector Definition357.1.2 Voltage and Ground Signals367.1.3 Fault LED Out367.1.4 Ready LED Out367.1.5 Start Mated Controls377.1.6 SEL_n and Enclosure Service Signals377.1.7 -ENBL_BYP CH1, -ENBL_BYP_CH2397.1.8 -Drive Present397.1.9 Dev_Ctrl_Code_x398.0 Environment418.1 Temperature and humidity418.2 Storage requirements428.2.1 Packaging428.2.2 Storage time428.3 Corrosion test428.4 Cooling requirements439.0 DC Power Requirements459.1 Power Supply Current, Average and Peak469.2 Ripple Voltage489.3 Power Consumption Efficiency Index4810.0 Reliability4910.1 Start/Stop Cycles4910.2 Data Reliability4910.3 Seek errors4910.4 Failure prediction (PFA/S.M.A.R.T)4910.5 Preventive Maintenance4910.6 Temperature Warning4911.0 Mechanical Specifications5111.1 Outline5111.2 Mechanical Dimensions5111.3 Interface Connector5311.4 Mounting Positions and Tappings5411.5 Drive Mounting5611.6 Heads Unload and Actuator Lock5612.0 Vibration and Shock5712.1 Operating Vibration5712.1.1 Random Vibration5712.1.2 Swept Sine Vibration5712.2 Non-operating Vibrations5712.2.1 Random Vibration5712.2.2 Swept Sine Vibration5712.3 Operating shock5712.4 Non-operating shock5812.4.1 Half sinewave shock pulse5812.4.2 Rotational shock5813.0 Acoustics5913.1 Sound power levels5914.0 Identification6114.1 Labels6115.0 Electromagnetic Compatibility6315.1 Class A Regulatory Notices6416.0 Standards6716.1 UL and C-UL Standard Conformity6716.2 European Standards Compliance6716.3 German Safety Mark6716.4 Flammability6716.5 Corporate Standards Compliance6717.0 FC-AL attachment6917.1 Fundamentals6917.1.1 Node and Port names7017.1.2 NL_Port address7017.1.3 Primitive signals and sequences7117.1.4 Frames7217.1.5 Sequences7217.1.6 Exchanges7317.2 Basic Link Services7317.2.1 Abort sequence (ABTS)7317.2.2 Basic accept (BA_ACC)7417.2.3 Basic reject (BA_RJT)7517.3 Extended Link Services7617.3.1 Link Service Accept (LS_ACC)7717.3.2 Link Service Reject (LS_RJT)7817.3.3 Port Login (PLOGI)7917.3.4 Logout (LOGO)8717.3.5 Fabric Login (FLOGI)8817.3.6 Fabric Address Notification (FAN)9217.3.7 Port Discovery (PDISC)9317.3.8 Address Discovery (ADISC)9317.3.9 Process Login (PRLI)9417.3.10 Process Logout (PRLO)9817.3.11 Read Link Error Status Block (RLS)10017.3.12 Report Node Capabilities (RNC)10117.3.13 Re-instate Recovery Qualifiers (RRQ)10517.3.14 Third Party Process Logout (TPRLO)10617.3.15 Request Node Identification Data (RNID)10817.3.16 Report Port Speed Capabilities (RPSC)11117.4 Common Fibre Channel Services11117.4.1 Register FC-4 Types (RFT_ID)11417.5 FC-AL timers11617.5.1 Link Failure11717.6 Invalid frame delimiter11718.0 SCSI-FCP11918.1 Terminology11918.2 Information Units12018.2.1 FCP_CMND12118.2.2 FCP_XFER_RDY12318.2.3 FCP_DATA12318.2.4 FCP_RSP12318.3 Task Attributes12518.4 Task Management functions12618.4.1 Abort Task (Implemented as ABTS BLS)12718.4.2 Abort Task Set12718.4.3 Terminate Task12818.4.4 Clear ACA12818.4.5 Target Reset12818.4.6 Clear Task Set12818.4.7 Reset LUN12818.5 Miscellaneous12818.5.1 Tags12818.5.2 Auto-Contingent Allegiance (ACA)12818.5.3 Autosense12919.0 SCSI Command Set13119.1 SCSI Control Byte13319.2 Abbreviations13319.3 Byte ordering conventions13319.4 FORMAT UNIT (04)13419.4.1 Parameter List Header13619.4.2 Defect Descriptor13719.5 INQUIRY (12)14119.5.1 Inquiry Data14219.6 LOG SELECT (4C)15319.7 LOG SENSE (4D)15619.7.1 Log Page parameters15719.7.2 Log Sense Page 015819.7.3 Log Sense Page 215919.7.4 Log Sense Page 316119.7.5 Log Sense Page 516319.7.6 Log Sense Page 616519.7.7 Log Sense Page D16619.7.8 Log Sense Page E16719.7.9 Log Sense Page F16819.7.10 Log Sense Page 1016919.7.11 Log Sense Page 1517219.7.12 Log Sense Page 2F17519.7.13 Log Sense Page 3017619.7.14 Log Sense Page 3717919.8 MODE SELECT (15)18119.9 MODE SELECT (55)18219.10 MODE SENSE (1A)18319.10.1 Mode Parameter List18419.10.2 Mode Page 00 (Vendor Unique Parameters)18819.10.3 Mode Page 01 (Read/Write Error Recovery Parameters)19019.10.4 Mode Page 02 (Disconnect/Reconnect Parameters)19519.10.5 Mode Page 03 (Format Device Parameters)19619.10.6 Mode Page 04 (Rigid Disk Drive Geometry Parameters)19819.10.7 Mode Page 07 (Verify Error Recovery Parameters)19919.10.8 Mode Page 08 (Caching Parameters)20019.10.9 Mode Page 0A (Control Mode Page Parameters)20219.10.10 Control Extension Subpage20319.10.11 Mode Page 0C (Notch Parameters)20419.10.12 Mode Page 19h (Fibre Channel Port Control Page)20619.10.13 Mode Page 1A (Power Control)20819.10.14 Mode Page 1C (Informational Exceptions Control)20919.11 MODE SENSE (5A)21219.12 PERSISTENT RESERVE IN (5E)21319.12.1 Service Action21419.12.2 Parameter data for Read Keys21519.12.3 Parameter Data for Read Reservations21619.13 PERSISTENT RESERVE OUT (5F)21719.13.1 Service Action21819.13.2 Type21919.13.3 Parameter list22019.13.4 Summary22119.14 PRE-FETCH (34)22319.15 READ (6) - (08)22419.16 READ (10) - (28)22519.17 READ (12) - (A8)22719.18 READ (16) - (88)22819.19 READ (32) - (7F/09)22919.20 READ BUFFER (3C)23119.20.1 Combined Header And Data (Mode 00000b)23219.20.2 Read Data (Mode 00010b)23319.20.3 Descriptor (Mode 00011b)23419.20.4 Read Data from Echo Buffer (Mode 01010b)23519.20.5 Echo Buffer Descriptor (Mode 01011b)23619.20.6 Enable Expander Communications Protocol and Echo Buffer (Mode11010b)23719.21 READ CAPACITY (10) - (25)23819.22 READ CAPACITY (16) (9E/10)24019.22.1 Returned Data Format24119.23 READ DEFECT DATA (37)24219.23.1 Defect List Header24419.23.2 Defect List Descriptor24519.23.3 Bytes from Index Format (100b)24619.23.4 Physical Sector Format (101b)24719.24 READ DEFECT DATA (B7)24819.24.1 Defect List Header24919.24.2 Defect List Descriptor25019.24.3 Bytes from Index Format (100b)25119.24.4 Physical Sector Format (101b)25219.25 READ LONG (3E)25319.26 REASSIGN BLOCKS (07)25419.27 RECEIVE DIAGNOSTICS RESULTS (1C)25619.27.1 Receive Diagnostic Results Page 025719.27.2 Enclosure Service Information (ESI) Page Format25819.27.3 Receive Diagnostic Results Page 4025919.27.4 Receive Diagnostic Page A0h26119.28 RELEASE (17)26219.29 RELEASE (57)26319.30 REPORT DEVICE IDENTIFIER (A3/05)26419.31 REPORT LUNS (A0)26619.32 REPORT SUPPORTED OPERATION CODES (A3/0C)26719.32.1 All_commands parameter data format26919.32.2 One_command parameter data format27019.33 REPORT SUPPORTED TASK MANAGEMENT FUNCTIONS (A3/0D)27119.34 REQUEST SENSE (03)27319.35 RESERVE (16)27419.36 RESERVE (56)27519.37 REZERO UNIT (01)27619.38 SEEK (6) - (0B)27719.39 SEEK (10) - (2B)27719.40 SEND DIAGNOSTIC (1D)27819.40.1 Send Diagnostic Page 028019.40.2 Send Diagnostic Page 4028119.40.3 Send Diagnostic Page A0h28319.41 SET DEVICE IDENTIFIER (A4/06)28419.42 START STOP UNIT (1B)28519.43 SYNCHRONIZE CACHE (10) - (35)28619.44 SYNCHRONIZE CACHE (16) - (91)28719.45 TEST UNIT READY (00)28819.46 VERIFY (2F)28919.47 VERIFY (12) - (AF)29219.48 VERIFY (16) - (8F)29319.49 VERIFY (32) - (7F/0A)29419.50 WRITE (6) - (0A)29619.51 WRITE (10) - (2A)29719.52 WRITE (12) - (AA)30019.53 WRITE (16) - (8A)30119.54 WRITE (32) - (7F/0B)30219.55 WRITE AND VERIFY (10) - (2E)30419.56 WRITE AND VERIFY (12) - (AE)30519.57 WRITE AND VERIFY (16) - (8E)30619.58 WRITE AND VERIFY (32) - (7F/0C)30719.59 WRITE BUFFER (3B)30919.59.1 Combined Header And Data (Mode 00000b)31019.59.2 Write Data (Mode 00010b)31119.59.3 Download Microcode (Mode 00100b)31219.59.4 Download Microcode and Save (Mode 00101b) -Single Binary File31319.59.5 Download Microcode and Save (Mode 00111b) - Multiple Binary Files31419.59.6 Write Data to Echo Buffer (Mode 01010b)31519.59.7 Enable Expander Communications Protocol (Mode 11010b)31619.60 WRITE LONG (3F)31719.61 WRITE SAME (41)31819.62 WRITE SAME (16) - (93)31919.63 WRITE SAME (32) - (7F/0D)32020.0 SCSI Status Byte32321.0 Additional information32521.1 Obtaining an AL_PA32521.2 Loop Initialization Procedure32521.3 Flow Control32721.4 Login Requirements32721.5 Public Loop Operation32821.5.1 NL_Port Initialization32921.6 SCSI Protocol33121.6.1 Priority of SCSI Status Byte Reporting33121.6.2 Invalid LUN Processing33121.6.3 Overlapped Commands33121.6.4 Command Processing During Execution of Active I/O Process33221.6.5 Unit Attention Condition33321.6.6 Command Processing During Startup and Format Operations33521.6.7 Internal Error Condition33521.6.8 Deferred Error Condition33521.6.9 Degraded Mode33621.6.10 Command Processing while Reserved34321.7 Priority Commands34321.8 Command Queuing34421.8.1 Queue Depth34421.8.2 Queue Full Status34421.8.3 Effects of LIP on Command Queuing34421.8.4 Termination of I/O Processes34421.9 Command Reordering34421.10 Concurrent I/O Process34421.11 Write Cache34521.12 Automatic Rewrite/Reallocate34521.13 Segmented Caching34721.13.1 Overview34721.13.2 Read Ahead34721.14 Multiple Initiator Systems34721.14.1 Sense Data34721.14.2 Mode Pages34721.15 Enclosure Services34721.15.1 Enclosure Initiated ESI34821.16 Multiple Initiator Environment34821.16.1 Initiator Sense Data34821.16.2 Initiator Mode Select/Mode Sense Parameters34821.17 Reset34821.17.1 Reset Sources34921.17.2 Reset Actions34921.18 Diagnostics34921.18.1 Power on Diagnostics34921.18.2 Self-test via SEND DIAGNOSTIC Command35021.19 Idle Time Function35321.20 Command Time out Limits35321.20.1 Reassignment Time35321.20.2 Format Time35321.20.3 Start/Stop Unit Time35321.20.4 Medium Access Command Time35421.20.5 Time-out Limits for Other Commands35421.21 Recommended Initiator ERP35521.21.1 Drive Service Strategy35521.21.2 Recommendations for System Error Log35621.21.3 Data Recovery Procedure35621.21.4 Nondata Error Recovery Procedure35822.0 SCSI Sense Data36522.1 SCSI Sense Data Format36522.2 Sense Data Description36622.2.1 Valid (Bit 7 of byte 0)36622.2.2 Error Code (Bit 6 - 0 of byte 0)36622.2.3 ILI: Incorrect Length Indicator (Bit 5 of byte 2)36622.2.4 Sense Key (Bit 3 - 0 of byte 2)36722.2.5 Information Bytes (Byte 3 through 6)36822.2.6 Additional Sense Length (Byte 7)36822.2.7 Command Specific Information (Byte 8 through 11)36822.2.8 Additional Sense Code/Qualifier (Byte 12 and 13)36922.2.9 RU: Field Replaceable Unit (Byte 14)38822.2.10 Sense Key Specific (Byte 15 through 17)38822.2.11 Reserved (Byte 18 through 19)39122.2.12 Vendor unique error information (Byte 20 through 23)39122.2.13 Physical Error Record (Byte 24 thru 29)39122.2.14 Reserved (Byte 30 through 31)39123.0 Appendix. UEC list393文件大小: 3.4 MB页数: 417Language: English打开用户手册