Emerson NGA2000 TO2 Benutzerhandbuch

748374-F 

March 2003 

Rosemount Analytical Inc.    A Division of Emerson Process Management 

Startup and Operation           3-1 

Prior to initial startup, the user should perform 
the leak test procedure outlined in Section 2. 

For the remainder of this section, Analyzer 
Module interconnection with a Platform or some 
interfacing component will be assumed. Display 
and Keypad information refers to that which the 
user can expect to see and do with regard to the 
Front Panel of the Platform. 

(For a complete description of Platform Front 
Panel controls and indicators, see the Platform 
instruction manual. 

Three kinds of Display screens are available to 
the user: 

• Run 

Mode 

• Menu 

• Help 

The Run Mode is the normal mode of op-
eration. In this mode, the Display will show 
the current gas measurement, the compo-
nent of interest, the current operations of 
the softkeys, and several graphics: a bar 
representing the displayed concentration as 
a percent of fullscale and up to four lines 
showing user selectable secondary parame-
ters from either the Analyzer Module or any 
IO module bound to it.  See the Platform 
manual for information as to how to select 
these. 

If more than one Analyzer Module is con-
nected to the system, an additional Run 
Mode display will show as many as four 
(five for version 2.3 and later) gas meas-
urements on screen. 

 

 

 

 

 

 

 

The Menu structure enables the user to ac-
cess data and functions, and put informa-
tion onto the network.  From the Run Mode 
display, press the MENUS softkey to gain 
access to the Main Menu. 

 
 
 
 
 
 
 
 
 
 
 
 

 

The Main Menu is subdivided into three lev-
els of control based generally on which per-
sonnel is likely to use it: Basic Controls - 
Operators, Expert Controls and set up - 
System Engineers, and Technical level con-
figuration - Analyzer technicians. Many lay-
ers of the menu structure are described at 
appropriate places throughout this manual. 

0 Range 3

50

19.4

ppm O

2

Basic controls . . .

Expert controls and set up . . .
(Operational configuration)

Technical level configuration . . .
(Diagnostic and manufacturing/service)