Universal Electronics Polaris Benutzerhandbuch

blink, then the code entry was 
incorrect. Try steps 2 and 3 again, 
using the same code.

5.

Repeat steps 1 through 4 above for the 
next device you want to control (either 
your television or cable box).

Your Polaris Remote Control is now ready to 
operate your cable box. You can use your 
remote control to turn your cable box on and 
off, and to change the channel.

To change the channel, do the following:

To turn on your television, press TV. The TV key 
blinks once and your television turns on. To 

4.

Aim the remote control at the device 
you want to control. Press the key for 
that device once (either TV or CBL). If 
the device turns off, then you have 
successfully programmed your remote 
control for that device. If the device 
does not turn off, then repeat steps 2 
through 4 until you have found the 
code for that device.

1.

To turn on your cable box, press CBL. 
The CBL key blinks once and your 
cable box turns on. To turn off your 
cable box, press CBL. The CBL key 
blinks once and your cable box turns 
off.

1.

Use the remote control's CH+ and CH- 
keys to navigate to the channel you 
wish to view, one channel at a time.