Panasonic AJ-D850P Benutzerhandbuch
Setup menus
– 70 –
USER menu
<VIDEO>
(continued)
Item
Setting
No.
Superimposed
No.
Superimposed
Description
display
display
604
V-MUTE
0000
N-MUTE
SEL
0001
LOW RF
605
CC (F1)
0000
BLANK
BLANK
0001
THRU
606
CC (F2)
0000
BLANK
BLANK
0001
THRU
608
FREEZE
0000
FIELD
SEL
0001
FRAME
610
OUT C
0000
B/W
KILL
0001
COLOR
611
EDH
0000
OFF
0001
ON
613
VIN SETUP
0000
THRU
0001
CUT
614
VOUT
0000
THRU
SETUP
0001
ADD
616
CMPNT
0000
THRU
SETUP
0001
CUT
617
INTER-
0000
OFF
POLATE
0001
AUTO
The underline on the setting item denotes the initial setting.
This selects whether the video output signals are to be muted
when the blank portion of the tape is detected during play-
back.
0: No muting. (Freeze)
1: Muting. (Set to gray.)
when the blank portion of the tape is detected during play-
back.
0: No muting. (Freeze)
1: Muting. (Set to gray.)
This selects ON or OFF for the closed capture signal in the
first field.
0: Forced blanking performed.
1: Blanking not performed.
first field.
0: Forced blanking performed.
1: Blanking not performed.
This selects ON or OFF for the closed capture signal in the
second field.
0: Forced blanking performed.
1: Blanking not performed.
second field.
0: Forced blanking performed.
1: Blanking not performed.
This selects the freeze mode for still pictures.
0: Field freeze.
1: Frame freeze.
<Note>
When frame freeze has been selected, the frame slow status
is established with the slow setting.
0: Field freeze.
1: Frame freeze.
<Note>
When frame freeze has been selected, the frame slow status
is established with the slow setting.
This selects chroma color killer processing for the video output
signals.
0: The signals are forcibly processed as B/W signals.
1: The signals are automatically processed.
signals.
0: The signals are forcibly processed as B/W signals.
1: The signals are automatically processed.
This selects whether to superimpose EDH onto the serial
output signals.
0: EDH is not superimposed.
1: EDH is superimposed.
<Note>
This item is valid when the optional serial interface board has
been installed.
output signals.
0: EDH is not superimposed.
1: EDH is superimposed.
<Note>
This item is valid when the optional serial interface board has
been installed.
This selects whether the composite signal is to be recorded
with setup or without setup.
0: When recording signals with no setup.
1: When recording signals with 7.5% setup.
<Note>
When recording composite signals, be sure to double-check
whether the signals are to be recorded with or without setup.
with setup or without setup.
0: When recording signals with no setup.
1: When recording signals with 7.5% setup.
<Note>
When recording composite signals, be sure to double-check
whether the signals are to be recorded with or without setup.
This selects the composite output signal.
0: The signal is output without setup.
1: The signal is output with 7.5% setup.
<Note>
When setting this menu item, bear the setup menu No. 616
(CMPNT SETUP) setting in mind.
0: The signal is output without setup.
1: The signal is output with 7.5% setup.
<Note>
When setting this menu item, bear the setup menu No. 616
(CMPNT SETUP) setting in mind.
When composite, component and serial (digital) signals are to
be output:
0: They are output in their original form.
1: They are output without the 7.5% setup signal.
be output:
0: They are output in their original form.
1: They are output without the 7.5% setup signal.
Although vertical interpolation is performed automatically
during slow-motion playback and the vertical motion of the
playback picture is reduced, this menu item enables the
interpolation operation to be forcibly turned off.
0: The interpolation operation is forcibly turned off.
1: The interpolation operation is automatically turned on
during slow-motion playback and the vertical motion of the
playback picture is reduced, this menu item enables the
interpolation operation to be forcibly turned off.
0: The interpolation operation is forcibly turned off.
1: The interpolation operation is automatically turned on
during slow-motion playback.