Panasonic AJ-D850P Benutzerhandbuch

– 90 –

If the capstan motor speed is abnormally low, the 
AUTO OFF lamp lights, and the message display 
flashes.

STOP
(POWER OFF

→

ON)

If an abnormal tension at the supply side is detected 
in the capstan mode, the AUTO OFF lamp lights, and 
the message display flashes.

STOP
(POWER OFF

→

ON)

If condensation is detected, the AUTO OFF lamp 
lights, the message display flashes, and the VTR is 
transferred to the eject mode. After the tape is 
ejected, the drum rotates in order to eliminate the 
condensation.
When the condensation has been eliminated, the 
AUTO OFF lamp and message display go off, and 
the VTR can be used.
<Notes>
 1)

 2)

EJECT
(Normal operation
resumed after
condensation is
eliminated)

If the cylinder motor speed is abnormally high, the 
AUTO OFF lamp lights, and the message display 
flashes.

STOP
(POWER OFF

→

ON)

If the tape start and tape end are detected simulta-
neously either during or after loading, the AUTO OFF 
lamp lights, and the message display flashes.

STOP
(POWER OFF

→

ON)

If condensation is detected in the eject mode, the 
drum starts rotating as soon as it is detected.
If condensation is detected when the cassette 
has been inserted, the drum rotation is stopped, 
and after the tape is ejected, the drum starts 
rotating.

If the cylinder motor speed is abnormally low, the 
AUTO OFF lamp lights, and the message display 
flashes.

STOP
(POWER OFF

→

ON)

If the cassette does not move up even when 6 
seconds have elapsed since the VTR was transferred 
to the eject mode, the AUTO OFF lamp lights, and 
the message display flashes.
<Note>
If the cassette does not move down inside the 
machine even when 6 seconds have elapsed since 
the cassette was inserted, the VTR is transferred to 
the eject mode.

STOP
(POWER OFF

→

ON)

When the unloading operation is not completed within 
6 seconds, the AUTO OFF lamp lights, and the 
message display flashes.
<Note>
When the loading operation is not completed within 6 
seconds, the VTR is transferred to the eject (unload-
ing) mode.

STOP
(POWER OFF

→

ON)

The AUTO OFF lamp lights and the message display 
flashes when the take-up reel has been rotating idly 
for a fixed period of time while the start/end 
processing operation during loading (half position) is 
being performed or when it was impossible to eject 
the tape.

STOP
(POWER OFF

→

ON)