Go-Video 9100 Benutzerhandbuch

CHAPTER 6 - RECORD FEATURES    

Your Dual-Deck VCR offers a variety of recording options,
including One-Touch, Sequential, Loop and Timer Recording.
To record a TV program:

Insert a blank tape into either deck.

Select the channel you want to record by pressing the

CHANNEL

 Up/Down buttons on the remote control (or cable

converter box if you have one).

Press 

RECORD

 to begin recording.

While you are recording the TV show, you can:

• Pause the recording by pressing 

PAUSE

 or stop the record-

ing by pressing 

STOP

 (to resume recording, press 

RECORD

).

• Watch a different channel by pressing 

TV/VCR

, then use

your TV’s tuner to select the new channel.

• Watch a video by inserting a tape in the opposite deck and

switching the 

TV VIEW

 button to that deck.

• Add recording time in half-hour increments with One

Touch Recording (see below).

Use One-Touch Recording (OTR) to record in 30 minute
increments up to 9 hours and 30 minutes.

Press 

RECORD

 to start recording.

Press 

RECORD

 again to enter OTR mode (OTR 0:30 will

appear on the On-Screen Display).

Keep pressing 

RECORD

 to add 30-minute increments to the

total recording time up to 9:30.

When the record time has elapsed, the deck
will stop automatically. If the 

POWER

 key is

pushed during
OTR, the VCR
will turn off
upon completion
of recording.

On-Screen Display for

One-Touch Recordings

f you push 

RECORD

 one time beyond

OTR 9:30, the VCR goes into LOOP
mode, which allows the VCR to
record in a continuous loop (see p.29).