Go-Video 9100 Benutzerhandbuch
CHAPTER 6 - RECORD FEATURES
29
Sequential & Loop Record
Two decks give you twice the recording features of a normal
VCR. Sequential Record allows you to insert tapes in both
decks and record one after another. Loop Record allows you
to record both tapes in a continuous loop.
VCR. Sequential Record allows you to insert tapes in both
decks and record one after another. Loop Record allows you
to record both tapes in a continuous loop.
To activate Sequential or Loop Record:
1
Insert tapes in both decks.
2
Press
MENU
until the DUAL-DECK FEATURES menu
appears.
3
Press “5” repeatedly to set RECORD MODE to:
Norm - Tapes record normally.
Seq - (Sequential) Deck 1 records over the entire tape, then
Deck 2 records over the entire tape. If Auto Rewind is
set to on, both tapes will rewind automatically when
recording is finished.
set to on, both tapes will rewind automatically when
recording is finished.
Loop - Deck 1 records to the end of the tape, then Deck 2
begins recording. While Deck 2 is recording, Deck 1
automatically rewinds to the beginning. When
recording is finished in Deck 2, Deck 1 records again
and the process repeats in a continuous loop until
you press the
automatically rewinds to the beginning. When
recording is finished in Deck 2, Deck 1 records again
and the process repeats in a continuous loop until
you press the
STOP
key. Rewinding is automatic
regardless of the Auto Rewind setting.
Date/Time Stamp
To help keep track of your tape collection, you can superimpose
a Date/Time Stamp on both regular and Timer recordings. To
activate the Date/Time Stamp:
a Date/Time Stamp on both regular and Timer recordings. To
activate the Date/Time Stamp:
1
Press
MENU
until the DUAL-DECK FEATURES menu
appears.
2
Press “1” to select VCR SETTINGS/SET CLOCK.
3
Press “5” repeatedly to set DATE/TIME STAMP to:
Timer - The date, time, channel and duration will appear
for 5 seconds at the start of Timer Recordings only.
All - The date, time and channel information will be recorded
for about 5 seconds at the start of all recordings.
Cont - (Continuous) The date, time and channel information
will record continuously on all recordings. This option
disables the On-Screen Display and Menu system.
Stop the recording to resume use of these functions.
disables the On-Screen Display and Menu system.
Stop the recording to resume use of these functions.
Off - Date/Time Stamp is disabled.
Note: The Date/Time
Stamp does not
record during a
Copy Tape
session.
record during a
Copy Tape
session.
Set two tapes to record
sequentially or in a
continuous loop.
Date/Time Stamp allows you to
superimpose the Date, Time and
Channel on all your recordings.
U
se the Date/Time Stamp with
the Automatic Show Finder feature
to find specific programs on a tape with
multiple recordings (see page 38) .
to find specific programs on a tape with
multiple recordings (see page 38) .