Golden Technologies GP160 Benutzerhandbuch

LiteRider PTC_Owner’s Manual                                                                                                                    Rev A_121911 

   

             
 

Your LiteRider PTC is simple to operate. However, for your safety and the safety of others, 
Golden Technologies, Inc. recommends that you carefully read and understand the 
following operating instructions. We also recommend that you practice operating your 
LiteRider PTC in an area free of any obstacles. Once you have gained confidence in your 
ability to control your power chair, you will more easily be able to operate it in normal daily 
conditions.                                                                                                                                      

 
A WORD OF CAUTION                                                                                                            
Before turning on the power of your LiteRider PTC, take note of your environment and set 
your speed control accordingly. (See “Speed Control Buttons” figure 15 on page 24) For 
indoor driving, we recommend that you select the lowest speed setting. For outdoor driving, 

we recommend that you select a speed setting at which you feel comfortable, safe, and in 
control of your power chair. Familiarize yourself with the features of your LiteRider PTC 
described below and follow the instructions to safely operate your power chair.                              
 
DRIVING: The Joystick On/Off Switch                                                                                   

Push the on/off button to turn on the power to your LiteRider PTC. See figure 15 on page 
24. The 10 LEDs will flash once and a number of LEDs will remain depending on the state 
of the battery charge.                                                                                                                      
♦ The LED (Light Emitting Diode) array, that functions as the battery charge gauge, will 
light up. See “Battery Charging” on pages 29-30.                                                                            

Pressing the on/off button again will turn off the power to your LiteRider PTC.                                
 
The Speed Control Buttons                                                                                                    
These buttons provide you with a way to control the maximum speed of your LiteRider PTC.  
♦ Push the “Slow” button repeatedly to set your chair’s speed to the slowest setting 
(recommended for indoor operation). Slowest speed is indicated by one (1) lit LED section 

on the speed indicator scale.                                                                                                           
♦ Push the “Fast” button repeatedly to set your chair’s speed to its highest setting. Highest 
speed is indicated by five (5) lit LED sections on the speed indicator scale.                                      
 
NOTE: For your safety, the controller automatically sets the reverse speed, 

acceleration, and deceleration in proportion to the speed control setting. 
 
 
 

 
 
 
 

 
 
 
  

21