Golden Technologies GP160 Benutzerhandbuch
LiteRider PTC_Owner’s Manual Rev A_121911
VI. COMFORT SETTINGS
Footrest Angle Adjustment
1. Fold the footrest upward for easy access to the angle adjustment bolt. See figure 11.
2. Turn the jam nut counter-clockwise with a 17mm wrench to loosen.
3. Use an 8mm Allen wrench to turn the adjustment bolt. Turn the adjustment bolt
1. Fold the footrest upward for easy access to the angle adjustment bolt. See figure 11.
2. Turn the jam nut counter-clockwise with a 17mm wrench to loosen.
3. Use an 8mm Allen wrench to turn the adjustment bolt. Turn the adjustment bolt
counter-clockwise to increase the footrest angle. Turn the adjustment bolt clockwise to
decrease the footrest angle.
4. When the desired footrest angle is reached, re-tighten the jam nut.
decrease the footrest angle.
4. When the desired footrest angle is reached, re-tighten the jam nut.
Footrest Height Adjustment
1. Remove front body shroud by lifting it up and off of the power chair base.
2. Use a 10mm socket and 4mm Allen wrench to remove the bolts indicated in
figure 12.
3. Slide the footrest to the desired height.
4. Align the bolt holes in the footrest and the footrest bracket.
2. Use a 10mm socket and 4mm Allen wrench to remove the bolts indicated in
figure 12.
3. Slide the footrest to the desired height.
4. Align the bolt holes in the footrest and the footrest bracket.
5. Install and tighten the bolts.
19
Figure 11
Angle Adjustment Bolt
(8mm Allen)
(8mm Allen)
Jam Nut
(17mm)
(17mm)
Figure 12
Lock Nuts
(10mm)
Height Adjust Bolts
(4mm Allen)