Harbor Freight Tools 68120 Benutzerhandbuch

Page 10

Horizontal Engines 

        

1.  To start a cold engine, move the Choke to the 

CHOKE position.  

To restart a warm engine, leave the Choke in the 

RUN position. 

 

 

 

 

 

2.  Open the Fuel Valve. 

 

 

3.  Slide the Throttle or Speed Control Lever to 1/3 

away from the SLOW position (the “turtle”).

Note: Some tools have a Speed Control Lever located 

elsewhere on the tool which functions the same as the 

Throttle. Use the Speed Control Lever in place of the Throttle 

when the tool is so equipped. 

 

 

4.  Turn the Engine Switch on. 

5.  Grip the Starter Handle of the Engine loosely and pull 

it slowly several times to allow the gasoline to flow into 

the Engine’s carburetor. Then pull the Starter Handle 

gently until resistance is felt. Allow Cable to retract fully 

and then pull it quickly. Repeat until the engine starts.

Note: Do not let the Starter Handle snap back against the engine.  

Hold it as it recoils so it doesn't hit the engine. 

 

CHOKE RUN

 1 

2

3

4

5