Honeywell MRP-2001E Benutzerhandbuch
Master Programming Level
Programming
MRP-2001 & MRP-2001E PN 53040:A 4/16/2007
57
3.5.3 Output Circuits
The options for the Output Circuits on the control panel main circuit board can be configured by
pressing 2 while viewing Programming Screen #2. The following screens will be displayed:
pressing 2 while viewing Programming Screen #2. The following screens will be displayed:
The Output Circuits can be configured independently by pressing 1 for Output 1, 2 for Output 2, 3
for Output 3 or 4 for Output 4.
for Output 3 or 4 for Output 4.
To program an Output circuit, press the number corresponding to the Output to be programmed.
The following screens will be displayed for each selection:
The following screens will be displayed for each selection:
PROGRAMMING
1=FACP CONFIG
2=INPUT ZONES
3=OUTPUT CIRCUITS
1=FACP CONFIG
2=INPUT ZONES
3=OUTPUT CIRCUITS
Programming Screen #1
OUTPUT CIRCUITS
1=OUTPUT 1
2=OUTPUT 2
3=OUTPUT 3
1=OUTPUT 1
2=OUTPUT 2
3=OUTPUT 3
NAC Selection Screen
OUTPUT CIRCUITS
1=OUTPUT 4
1=OUTPUT 4
NAC Selection Screen
OUTPUT #
1=ENABLED YES
2=TYPE ALARM NAC
1=ENABLED YES
2=TYPE ALARM NAC
Output Screen #1
Output Screen #2
OUTPUT #
1=SILENCE NON-SIL
2=AUTO SILENCE NO
3=SIL INHIBIT NO
1=SILENCE NON-SIL
2=AUTO SILENCE NO
3=SIL INHIBIT NO
Output Screen #3
OUTPUT #
1=CODING
STEADY
1=CODING
STEADY