Honeywell MRP-2001E Benutzerhandbuch

Programming

84

MRP-2001 & MRP-2001E   PN 53040:A  4/16/2007

To program the time and date into the control panel, press 1 while viewing Maintenance Screen #2.  
The following display will appear:  

To change the time, press 1 to display the following screen:

A flashing cursor will appear on the left side of the display.  Enter the four digit number 
corresponding to the time (0000 - 1259).  When the fourth digit is entered, the cursor will move one 
position to the right.  Press 1 for AM or 2 for PM to complete entering the time.  The display will 
return to the Time and Date Screen displaying the new time.

To change the date, press 2 while viewing the Time and Date Screen.  The following screen will be 
displayed:

A flashing cursor will appear on the left side of the display.  Enter the two digit month, two digit 
day and four digit year.  The cursor will move one position to the right after each entry.  When the 
fourth digit of the year has been entered, the display will return to the Time and Date Screen which 
will show the new date.

To change between 12 hour and 24 hour format, press 3 for Clock Format while viewing the Time 
and Date screen.  Each press of the 3 key will toggle the display between 12 HR and 24 HR format.

    PROGRAMMING
1=TIME-DATE

Maintenance Screen #2

   TIME AND DATE
1=TIME          01:00A
2=DATE        01012006
3=CLOCK FORMAT   12HRS

 ENTER TIME AS 12HRS
         :
       01:00
1=AM            2=PM

     ENTER DATE
    **-**-****
  MONTH DAY YEAR
    01-01-2006