JVC LYT1805-001A Benutzerhandbuch

Blank Search

Helps you find where you should start 
recording in the middle of a tape to avoid time 
code interruption ( 20).
1  Perform steps 

1

  - 

3

  in “Normal Playback” 

( 21).

2  Press BLANK.

•  The “BLANK SEARCH” indication 

appears and the camcorder 
automatically starts reverse or forward 
search, then stops at the spot which 
is about 3 seconds of tape before the 
beginning of the detected blank portion.

•  To cancel Blank Search, press 8 or 

BLANK.

Notes:

•  Before starting Blank Search, if the current 

position is at a blank portion, the camcorder 

searches in the reverse direction. If the 

current position is at a recorded portion, the 

camcorder searches in the forward direction.

•  If the beginning or end of the tape is reached 

during Blank Search, the camcorder stops 

automatically.

•  A blank portion which is shorter than  

5 seconds of tape may not be detected.

•  The detected blank portion may be located 

between recorded scenes. Before you start 

recording, make sure there is no recorded 

scene after the blank portion.

Attention:

During Shuttle Search, 

parts of the picture may 

not be clearly visible, 

particularly on the left 

side of the screen.

During Shuttle Search, 

parts of the picture may 

not be clearly visible 

across the screen.

Variable Shuttle Search

Allows variable-speed search in either 
direction during video playback.
During playback, press 

5

 once or twice 

for forward search, or 

3

 once or twice for 

reverse search.

3

5

x-10

x-3

x3

x10

• 

To resume normal playback, press U/ 9.

•  During playback, press and hold 5 or 

3

. The search continues as long as you 

hold the button. Once you release the button, 

normal playback resumes.

Appears when pictures recorded in the HDV 

format are detected. The pictures in the 

HDV format cannot be played back with this 

camcorder.

Notes:

•  The playback picture can be viewed in the LCD 

monitor or on a connected TV ( 41).

•  If Stop mode continues for 5 minutes 

when power is supplied from a battery, the 

camcorder shuts off automatically.

•  When a cable is connected to the AV 

connector, the sound is not heard from the 

speaker.