JVC LYT1805-001A Benutzerhandbuch
0
EN
Recording & Playback
• When shooting again after playing back a
recorded tape.
• When power shuts off during shooting.
• When a tape is removed and re-inserted
• When a tape is removed and re-inserted
during shooting.
• When shooting using a partially recorded
tape.
• When shooting again after shooting a
scene then opening/closing the cassette
holder cover.
holder cover.
Notes:
• The time code cannot be reset.
• During fast-forwarding and rewinding, the time
code indication does not move smoothly.
• The time code is displayed only when “TIME
CODE” is set to “ON”. ( 32)
Recording From The Middle Of A Tape
1 Play back a tape or use Blank Search
( 22) to find the spot at which you want
to start recording, then engage the Still
Playback mode ( 21).
to start recording, then engage the Still
Playback mode ( 21).
2 Set the Power Switch to “REC” ( 13), then
start recording.
Auto/Manual Mode
Press
AUTO button repeatedly to switch to
auto/manual recording mode. When manual
mode is selected, the indicator “M” appears
on the LCD monitor.
Auto Mode : A
Auto Mode : A
You can record using no special effects or
manual adjustments.
Manual Mode : M
Manual Mode : M
Recording is possible by setting various
functions manually.
-!.5!,
!54/
Time Code
During recording, a time code is recorded on
the tape. This code is to confirm the location
of the recorded scene on the tape during
playback.
the tape. This code is to confirm the location
of the recorded scene on the tape during
playback.
12:34:24
Display
Minutes
Seconds
Frames*
(30 frames
= 1 second)
*Frames are not displayed during recording.
Recording Start Point
Recording Start Point
1 2 3 4
Recording portion
Blank portion
Recorded tape
1
, 3 & 4, time code begins counting from
“00:00:00” (minute:second:frame).
2
2
, time code continues from the last time
code number.
If during recording a blank portion is left
partway through the tape, the time code is
interrupted. When recording is resumed,
the time code starts counting up again from
If during recording a blank portion is left
partway through the tape, the time code is
interrupted. When recording is resumed,
the time code starts counting up again from
“00:00:00”. To prevent this, perform Recording
From The Middle Of A Tape ( 20) in the
following cases;
From The Middle Of A Tape ( 20) in the
following cases;