JVC LYT1805-001A Benutzerhandbuch
8
EN
D.S.C. Recording & Playback
To Print By Selecting Still Images
And Number Of Prints
1
Perform steps
1
–
4
in “To Print All Still
Images (One Print For Each)” ( 27).
2
Select “CURRENT”, press
SET. The DPOF
screen appears.
3
Press
£ or ¤ to select the desired file.
4
Press
¢ or ¡ to select the number
indication (00), and press
SET.
5
Select the number of prints by pressing
¡
to increase the number, or
¢ to decrease
the number, and press
SET.
• Repeat steps
3
through
5
for the desired
number of prints.
• The number of prints can be set up to 15.
• To correct the number of prints, select the
image again and change the number.
6
Select “RETURN”, press
SET. The “SAVE?”
appears.
• If you did not change any settings in step
3
through
5
, the DPOF Menu reappears.
7
Select “EXECUTE”, press
SET.
• To cancel selection, select “CANCEL”.
To Reset The Number Of Prints
1
Perform steps
1
–
4
in “To Print All Still
Images (One Print For Each)” ( 27).
2
Select “RESET”, press
SET. The DPOF
screen appears.
3
Select “EXECUTE”, press
SET.
• To cancel selection, select “RETURN”.
• The number of prints is reset to 0 for all still
images.
Caution:
While performing the above, never disconnect
power, as this may cause the memory card to
be corrupted.
be corrupted.
Note:
When the image is printed from the printer, a
black bar appears at the bottom of the screen.
This is not a malfunction. By recording with
“DIS” deactivated ( 30) this can be avoided.
This is not a malfunction. By recording with
“DIS” deactivated ( 30) this can be avoided.
Initializing A Memory Card
You can initialize a memory card any time.
After initializing, all files and data stored in
the memory card, including those which have
been protected, are cleared.
After initializing, all files and data stored in
the memory card, including those which have
been protected, are cleared.
1
Perform steps
1
–
3
in “Normal Playback
Of Images” ( 25).
2
Press
MENU.
3
Select “MEMORY CARD” ( ).
4
Select “FORMAT”, press
SET. The
FORMAT menu appears.
FORMAT
ERASE ALL
EXISTING DATA?
EXECUTE
CANCEL
5
Select “EXECUTE”, press
SET. The
memory card is initialized.
• When initialization is finished, “NO
IMAGES STORED” appears.
• To cancel initialization, select “CANCEL”.