JVC LYT1805-001A Benutzerhandbuch

The “SETTING” functions which are set when the Power Switch is set to “

REC” are also applied 

when the Power Switch is set to “

PLAY”.

日本語

 / 한국어 / 繁體字 / [ENGLISH] / FRANCAIS / ESPAÑOL / 

PORTUGUÊS
The language setting can be changed. ( 17) 

 17, “Date/Time Settings”.

OFF:  Even though not heard while shooting, shutter sound is 

recorded on the tape. 

[ON]:  A melody sounds when any operation is performed. It also 

activates the shutter sound effect. 

OFF:  Disables the remote control operations.
[ON]:  Enables the remote control operations.

OFF:  Automatic demonstration will not take place.
[ON]:  Demonstrates certain functions such as Wipe/Fader and 

Effects, etc., and can be used to confirm how these functions 
operate. 

Notes:

•  Demonstration starts in the following cases:

•  When the Menu Screen is closed after “DEMO MODE” is turned 

“ON”.

•  With “DEMO MODE” set to “ON”, if there is no operation for about 3 

minutes after the Power Switch is set to “

REC”. 

•  Performing any operation during the demonstration stops the 

demonstration temporarily. If no operation is performed for more than 

3 minutes after that, the demonstration will resume.

• 

Demonstration cannot be turned on in the following conditions:

•  If a cassette is in the camcorder.

•  If the Power is not supplied from the AC Adapter.

•  “DEMO MODE” remains “ON” even if the camcorder power is turned 

off.

[CANCEL]: Does not reset all settings to the factory-preset.
EXECUTE:  Resets all settings to the factory-preset. 

CONTINUED ON NEXT PAGE

Playback Menus

The settings below are effective only for video playback except “REC MODE” and “SNAP/
SLOW”. 
SOUND L/R and NARRATION
During tape playback, the camcorder detects the sound mode in which the recording was made, 
and plays the sound back. Select the sound to accompany your playback picture.