JVC LYT1805-001A Benutzerhandbuch

LED Light

LED Light can be used to brighten the subject 
in the dark place during video recording or 
D.S.C. shooting.

Press 

LIGHT repeatedly to change the setting.

The light is on always.

The light turns on automatically 

when dark.

No display Disables this function.

Notes:

•  Be careful not to point the LED Light directly to 

eyes.

•  If the light does not reach the subject when 

the LED Light setting is “ON”, the Night-

Alive function will be activated, and makes it 

possible to shoot the subject brighter.

•  Since subjects are shot at a reduced shutter 

speed when the LED Light setting is “ON”, they 

will appear slightly blurred. 

Snapshot (Record Still Image 

On Tape)

This feature lets you record still images that 
look like photographs onto a tape.

1

  Set the 

MEMORY/VIDEO Switch to 

“

VIDEO”.

2

  Set the Power Switch to “

REC”. ( 13)

3

  Set 

“REC MEDIA” to “

/

 ” or  

“

” ( 31).

4

  Set “SNAP/SLOW” to “SNAP” ( 31).

5

  Press 

SNAPSHOT.

 

Notes:

•  The “

PHOTO” indication appears and a 

still image will be recorded for approx. 5 

seconds, then the camcorder re-enters the 

Record-Standby mode.

•  You can perform Snapshot also during 

recording. A still image will be recorded 

for approx. 5 seconds, then the normal 

recording resumes.

•  If the image taken by snapshot is too 

dark or too bright, select 

- ( 37) or 

“SPOTLIGHT” ( 39).

•  The image quality for snapshot in 16:9 

mode is 640 x 360. However, the approx. 

number of storable images is similar with 

snapshot in 4:3 mode. ( 24)

Motor Drive Mode

Keeping 

SNAPSHOT pressed in step 

5

  provides an effect similar to serial 

photography. (Interval between still images: 
approx. 1 second).

•  The Motor Drive mode is disabled when “REC 

MEDIA” is set to “

/

” or “

” 

  ( 31).

Live Slow

This feature is useful for recording or playing 
back precious or hard-to-see moments at a 
slow speed. Sound is recorded and played 
back in real time.

1

  Set the 

MEMORY/VIDEO Switch to 

“

VIDEO”.

2

  Set the Power Switch to “

REC” or “PLAY”.

•  If set to “

REC”, the recording mode should 

be set to “M” ( 20).

3

  Set “SNAP/SLOW” to “SLOW” ( 31, 34). 

The Live Slow indicator “

” appears.

4

  Press 

SLOW during recording or playback.

•  The moving pictures are divided into four 

frames. They are recorded or played 
back for 1.5 seconds, and then normal 
recording or playback resumes.

Note:

Live Slow cannot be used when the 16:9 Wide 

mode is selected.