JVC LYT1805-001A Benutzerhandbuch

Note:

Using Backlight Compensation may cause the 

light around the subject to become too bright and 

the subject to become white.

Spot Exposure Control

Selection of a spot metering area enables more 

precise exposure compensation.

1

  Set the Power Switch to “

REC” ( 13).

2

  Set the recording mode to “M” ( 20).

3

  Press 

- twice so that the Spot Exposure 

Control indicator “

  .  ” appears.

•  A spot metering area frame appears at the 

center of the LCD monitor.

4

  Press 

SET.

•  Spot Exposure Control is engaged.

•  Exposure is adjusted to make the 

brightness of the selected area most 

appropriate.

To cancel Spot Exposure Control
Press 

- once so that the “  .  ” indicator 

disappears.
To lock the iris
After step 

3

, press and hold 

SET over 2 

seconds. The “   ” indication appears and the 
iris is locked.

Notes:

•  Depending on the shooting location and 

condition, optimum result may not be attained. 

•  “STROBE” in “EFFECT” cannot be used with 

Spot Exposure Control.

Iris Lock

Like the pupil of the human eye, the iris 
contracts in well-lit environments to keep too 
much light from entering, and dilates in dim 
environments to allow in more light. Use this 
function in the following situations:
•  When shooting a moving subject.
•  When the distance to the subject changes 

(so its size in the LCD monitor changes), 
such as when the subject is backing away.

•  When shooting on a reflective natural 

background such as at the beach or when 
skiing.

•  When shooting objects under a spotlight.
•  When zooming.

1

  Perform steps 

1

 – 

5

 in “Exposure Control” 

( 36).

2

  Adjust zoom so that the subject fills the 

LCD monitor, then press and hold 

SET  

for over 2 seconds. The “

 ” indication 

appears.

3

  Press 

SET. The iris is locked.

4

  Press 

MENU.

Backlight Compensation

Backlight compensation feature brightens 
the dark subject portion by increasing the 
exposure.

1

  Set the Power Switch to “

REC” ( 13).

2

  Set the recording mode to “M” ( 20).

3

  Press 

- so that the Backlight 

Compensation indicator “

 - ” appears.

To cancel Backlight Compensation
Press 

- twice so that the “ - ” indicator 

disappears.