JVC LYT1805-001A Benutzerhandbuch

1

2

3

Connections To A TV Or VCR

1

 Yellow to VIDEO IN (Connect when your 

TV/VCR has only A/V input connectors).

2

 Red to AUDIO R IN*

3

 White to AUDIO L IN*

* Not required for watching still images only.

1

  Make sure all units are turned off.

2

  Connect the camcorder to a TV or VCR as 

shown in the illustration. 
If using a VCR, go to step 

3

. 

If not, go to step 

4

.

3

  Connect the VCR output to the TV input, 

referring to your VCR’s instruction manual.

4

  Turn on the camcorder, the VCR and the 

TV.

5

  Set the VCR to its AUX input mode, and 

set the TV to its VIDEO mode.

6

  Start playback on the camcorder ( 21).

•  Please set “WIDE TV” of Playback Menus 

so that the image may suit your TV (16:9 

TV or 4:3 TV) ( 29, 32).

To choose whether or not the following 
displays appear on the connected TV
•  Date/Time 

Set “DATE/TIME” to “ON”, “AUTO” or “OFF” 
( 32).

•  Time Code 

Set “TIME CODE” to “ON” or “OFF” ( 32).

•  On Screen 

Set “ON SCREEN” to “OFF”, “LCD” or 
“LCD/TV” ( 32).

Notes:

pack. ( 16)

•  To monitor the picture and sound from the 

camcorder without inserting a tape or memory 

card, set the camcorder’s Power Switch to 

“

REC”, then set your TV to the appropriate 

input mode.

•  Make sure you adjust the TV sound volume to 

its minimum level to avoid a sudden burst of 

sound when the camcorder is turned on.

Dubbing To A VCR

1

  Following the illustration,  41, 

“Connections To A TV Or VCR”, connect 
the camcorder and the VCR’s input 
connectors.

2

  Perform steps 

1

 – 

6

  “Connections To A TV 

Or VCR” ( 41).

3

  At the point you want to start dubbing, start 

recording on the VCR. (Refer to the VCR’s 
instruction manual.)

4

  To stop dubbing, stop recording on 

the VCR, then stop playback on the 
camcorder.