Nikon P7000 Benutzerhandbuch

T

e

ch

n

ical
 No

te

s an

d I
n

de
x

The following table lists the error messages and other warnings displayed on the 
monitor, as well as the solutions for dealing with them.

Display

Description

Solution

A

O
(blinks)

Clock not set.

Set clock.

B

Battery is running low. Prepare to charge or change battery. 16, 18

N
Battery exhausted.

Battery exhausted.

Charge or change battery.

P
Battery temperature high

Battery temperature is 
high.

Turn off camera, and allow battery to 
cool down before resuming use. Five 
seconds after this message appears, 
the monitor is turned off, and the 
power-on lamp, the AF lamp and the 
flash lamp flicker. After the lamps 
blink for three minutes, the camera 
turns off automatically, but you can 
also press the power switch to turn it 
off manually.

P
Please wait for the 
camera to finish 
recording.

Camera cannot 
perform other 
operations until 
recording is complete.

Wait until message clears from 
display automatically when 
recording is complete.

–

N
Memory card is write 
protected.

Write-protect switch is 
in “lock” position.

Slide the write-protect switch to 
“write” position.

P
This card cannot be used. Error accessing 

memory card.

• Use an approved card.
• Check that connectors are clean.
• Confirm that memory card is 

correctly inserted.

221
22
22

P
This card cannot be read.

P
Card is not formatted. 
Format card?
Yes
No

Memory card has not 
been formatted for use 
in this camera.

All data stored on the memory
card is deleted when formatted. If 
there is any data on the card that 
you want to keep, select No, and 
backup the data to a computer 
before formatting the memory card. 
To format the memory card, select
Yes and press the 

k button.