Canon S900 Benutzerhandbuch
22
Printing Maintenance
To check ink levels in Mac OS:
The S900 Print Monitor can display ink levels when they are running low if you
have enabled background printing in the Chooser option.
have enabled background printing in the Chooser option.
1.
Click Chooser on the Apple menu.
2.
Ensure the S900 is the selected
printer.
printer.
3.
Set Backgrounding to On, then
close the Chooser.
close the Chooser.
4.
After starting a print job, click the
Application menu in the upper
right corner of the screen, then
click BJ PrintMonitor. The BJ Print
Monitor will open. This dialog box
displays the ink levels.
Application menu in the upper
right corner of the screen, then
click BJ PrintMonitor. The BJ Print
Monitor will open. This dialog box
displays the ink levels.
Replacing Ink Tanks
To replace an empty ink tank:
1.
With the printer on, open the front cover. The printhead holder will
automatically move to the center.
automatically move to the center.
2.
Press the tab on the front of the empty ink tank, then remove and discard the
empty tank.
empty tank.
3.
Remove the new ink tank from its package. Pull the orange tape up, remove
the wrapper and twist off the orange protective cap.
the wrapper and twist off the orange protective cap.
To avoid spilling ink, never press on the sides of an ink tank.
4.
Holding the new ink tank at a slight angle, align it with the correct color slot,
then gently insert it.
then gently insert it.
Do not force an ink tank into the printhead. If the ink tank does
not go in smoothly, realign it, then try again.
not go in smoothly, realign it, then try again.
5.
Press down on the ink tank until it clicks into place.
6.
Close the front cover.
S900_QSG.book Page 22 Friday, November 2, 2001 1:34 PM