Canon S900 Benutzerhandbuch
Printing Maintenance
23
Aligning the Printhead
Part of the setup procedure for a new S900 photo printer includes aligning the
printhead. Occasionally, you may need to realign it, as determined by the results
of a nozzle check pattern (see “Printing a Nozzle Check Pattern” on page 24.)
printhead. Occasionally, you may need to realign it, as determined by the results
of a nozzle check pattern (see “Printing a Nozzle Check Pattern” on page 24.)
To align the printhead in Windows:
1.
Make sure the printer is on and paper is loaded.
2.
Click Start, then Settings, then Printers.
For Windows XP, click
Start, then Control Panel,
then Printers and Other
Hardware, then Printers
and Faxes. The
Maintenance tab may vary
for Windows 2000 and
Windows XP. Follow the
instructions when
prompted.
Start, then Control Panel,
then Printers and Other
Hardware, then Printers
and Faxes. The
Maintenance tab may vary
for Windows 2000 and
Windows XP. Follow the
instructions when
prompted.
3.
Right-click the Canon S900 printer icon,
then click Properties.
then click Properties.
4.
Click the Maintenance tab, then click
Print Head Alignment. When asked to
start printhead alignment, click OK.
Print Head Alignment. When asked to
start printhead alignment, click OK.
5.
Follow the on-screen instructions to
print an alignment pattern.
print an alignment pattern.
6.
From each column of the printed
alignment pattern, select the most
uniform pattern and enter the number in
the corresponding field.
alignment pattern, select the most
uniform pattern and enter the number in
the corresponding field.
7.
Click OK to complete printhead alignment.
S900_QSG.book Page 23 Friday, November 2, 2001 1:34 PM