Manualsbrain.com
  1. Handbücher
  2. Marken
  3. Panasonic
  4. AWRP120GJ
  5. Benutzerhandbuch

Panasonic AWRP120GJ Benutzerhandbuch

Download
Seite von 60
4
How to turn on and off the power of the remote cameras
How to turn on the power of the remote 
cameras
The power of the remote cameras in the standby state can be be turned 
on from the unit.
There are the following methods of turning on the power.
 
z
Turning on the power one camera at a time
 
z
Turning on the power of the cameras simultaneously with the turning 
on of the unit’s power
 
z
Turning on the power of multiple cameras
Turning off the power of all the cameras
Turning off the power of the selected camera group
Each of these methods is described in turn below.
Turning on the power one camera at a time
1 . 
Select the remote camera .
When the corresponding camera selection button 
[CAMERA SELECT/GROUP SELECT] is held down for 
approximately 3 seconds, the name of the remote camera is 
displayed on the top line of the LCD panel and “POWER OFF↓” is 
displayed on the bottom line.
2 . 
Turn the F2 dial to select “ON” while keeping the camera 
selection button held down and then press the F2 dial .
1
2
CAM100<AW-HE50>
      POWER:ON
Turning on the power of the cameras simultaneously 
with the turning on of the unit’s power
1 . 
Set the MENU button to ON .
2 . 
Open CAMERA SETUP menu [24] .
3 . 
Turn the F1 dial to display the “2 . AUTO ON” item .
2.AUTO ON      
             On
4 . 
Turn the F2 dial to select “On” and press the F2 dial .
The power of the remote cameras set to “Serial” or “Network” in 
CTRL TYPE menu [36] will now turn on simultaneously with the 
turning on of the unit's power.
 
z
Depending on the number of cameras connected, it may take 
some time before you can operate the unit.
Note
Turning on the power of multiple cameras
1 . 
Set the MENU button to ON .
Press the MENU button to turn on its indicator.
2 . 
Open CAMERA SETUP menu [24] .
3 . 
Turn the F1 dial to display the “1 . CAM POWER” item .
1.CAM POWER    
       GROUP ON
 
„
Turning on the power of all the cameras
4 . 
Turn the F2 dial to select “ALL ON” and press the F2 
dial .
1.CAM POWER    
         ALL ON
 
„
Turning on the power of the selected camera group
4 . 
 Turn the F2 dial to select “GROUP ON” and press the F2 
dial .
1.CAM POWER    
       GROUP ON