Panasonic AWRP120GJ Benutzerhandbuch
5
How to turn off the power of the remote
cameras
The power of the remote cameras can be be turned off from the unit.
There are the following methods of turning off the power.
z
Turning off the power one camera at a time
z
Turning off the power of multiple cameras
Turning off the power of all the cameras
Turning off the power of the selected camera group
Each of these methods is described in turn below.
Turning off the power one camera at a time
1 .
Select the remote camera .
When the corresponding camera selection button
[CAMERA SELECT/GROUP SELECT] is held down for
approximately 3 seconds, the name of the remote camera is
displayed on the top line of the LCD panel and “POWER ON↓” is
displayed on the bottom line.
2 .
Turn the F2 dial to select “OFF” while keeping the
camera selection button held down and then press the
F2 dial .
1
2
CAM100<AW-HE50>
POWER:ON
POWER:ON
Turning off the power of multiple cameras
1 .
Set the MENU button to ON .
2 .
Open CAMERA SETUP menu [24] .
3 .
Turn the F1 dial to display the “1 . CAM POWER” item .
1.CAM POWER
GROUP ON
GROUP ON
Turning off the power of all the cameras
4 .
Turn the F2 dial to select “ALL OFF” and press the F2
dial .
1.CAM POWER
ALL OFF
ALL OFF
Turning off the power of the selected camera group
4 .
Turn the F2 dial to select “GROUP OFF” and press the
F2 dial .
1.CAM POWER
GROUP OFF
GROUP OFF
How to turn on and off the power of the remote cameras
(continued)