Epson S1D13708 Benutzerhandbuch
Page 48
Epson Research and Development
Vancouver Design Center
S1D13708
Programming Notes and Examples
X39A-G-003-01
Issue Date: 01/11/20
ADVANCE
D
IN
FOR
MAT
ION
Subje
ct to C
ha
nge
8.3 Picture-In-Picture-Plus Examples
8.3.1 SwivelView 0° (Landscape Mode)
Figure 8-2: Picture-in-Picture Plus with SwivelView disabled
SwivelView 0
°
(or landscape) is a mode in which both the main and PIP
+
window are non-
rotated. The images for each window are typically placed consecutively, with the main
window image starting at address 0 and followed by the PIP
window image starting at address 0 and followed by the PIP
+
window image. In addition,
both images must start at addresses which are dword-aligned (the last two bits of the
starting address must be 0).
starting address must be 0).
Note
It is possible to use the same image for both the main window and PIP
+
window. To do
so, set the PIP
+
Line Address Offset register (REG[81h],REG[80h]) to the same value
as the Main Window Line Address Offset register (REG[79h],REG[78h]).
PIP+ window
main-window
PIP+ window y start position
panel’s origin
PIP+ window y end position
PIP+ window x start position
PIP+ window x end position
0° SwivelView
TM
(REG[85h],REG[84h])
(REG[8Dh],REG[8Ch])
(REG[91h],REG[90h])
(REG[89h],REG[88h])