Panasonic SDR-S10P Benutzerhandbuch
Others
105
VQT1D97
This unit cannot be
operated though it
is turned on.
operated though it
is turned on.
This unit does not
operate normally.
operate normally.
≥ The unit cannot be operated unless you open the LCD
monitor.
≥ Remove the SD card then press the RESET button.
(
l
109) If normal conditions are not restored yet,
remove the battery or AC adaptor, wait about 1 minute
and then reconnect the battery or AC adaptor. Then
about 1 minute later, turn on the power again.
(Conducting the above operation when the access
lamp is on may destroy the data on the card.)
and then reconnect the battery or AC adaptor. Then
about 1 minute later, turn on the power again.
(Conducting the above operation when the access
lamp is on may destroy the data on the card.)
The screen has
changed suddenly.
changed suddenly.
≥ Has the demonstration started?
# If you set [DEMO MODE] to [ON] without inserting a
card in video recording mode or picture recording
mode, the unit is automatically set to the demonstration
mode for introducing its functions. Normally this should
be set to [OFF]. Press the MENU button, then select
[SETUP]
mode, the unit is automatically set to the demonstration
mode for introducing its functions. Normally this should
be set to [OFF]. Press the MENU button, then select
[SETUP]
# [DEMO MODE] # [OFF] and press the
cursor button in the center.
A function
indication such as
the remaining time
indication or the
elapsed time
indication is not
shown.
indication such as
the remaining time
indication or the
elapsed time
indication is not
shown.
≥ If you set [SETUP]
>[DISPLAY]>[OFF], indications
other than warnings and date indications disappear.
Problem
Check points
VQT1D97(ENG).book 105 ページ ２００７年３月２０日 火曜日 午後５時３３分