Panasonic SDR-S10P Benutzerhandbuch

Seite von 136
Others
107
VQT1D97
Auto focus 
function does not 
work.
≥ Is manual focus mode selected?
# Set the unit to auto focus mode by pressing the AUTO 
button.
≥ Are you trying to record a scene which is hard to 
bring into focus in auto focus mode?
# There are some recording subjects and surroundings 
for which the auto focus does not operate correctly. 
(l 115) If so, use the manual focus mode to adjust the 
focus. (l 59)
Sound is not 
played back from 
the built-in speaker 
of this unit.
≥ Is the volume too low?
# During playback, press the volume button to display 
the volume indication and adjust it. (l 66)
During playback, 
the sound from the 
camera’s motor is 
heard in the 
recording.
≥ This is a mechanical sound of the camera, but it is not 
a malfunction.
≥ Are there drops of water on the microphone?
# The recorded mechanical sound may become louder 
and the microphone’s sensitivity may decrease when 
there are drops of water on the microphone.
Wipe off any drops of water and then leave the unit to 
dry naturally.
The speaker 
volume during 
playback is low.
≥ Are there drops of water on the microphone?
# The volume of the output sound may decrease when 
the speaker is wet. 
After wiping off any drops of water and then leaving the 
unit to dry naturally, it will return to normal.
Although this unit 
is correctly 
connected to a TV, 
playback images 
cannot be seen.
The playback 
images are 
squeezed 
horizontally.
≥ Have you selected video input on the TV? 
# Please read the operating instructions of your TV and 
select the channel that matches the input used for the 
connection.
≥ Is the [TV ASPECT] setting correct?
# Change the setting to match the aspect ratio of the TV.
Press the MENU button, then select [SETUP] 
[TV ASPECT] 
# [16:9] or [4:3] and press the cursor 
button in the center.
Problem
Check points
VQT1D97(ENG).book  107 ページ  2007年3月20日 火曜日 午後5時33分