Panasonic AJSPC700P Benutzerhandbuch

19

When the 

 BACK TALLY switch is set to [ON], the

lamp behaves in the same way as the front tally lamp at
the viewfinder. 

This switch controls the action of the 

 back and 

rear tally lamps.

Back and rear tally lamps enabled.

OFF: Back and rear tally lamps disabled.

This lamp starts blinking or lights up if something
unusual occurs in the memory.

Use this button to control illumination of the display
window.
Alternately pressing this button toggles illumination of
the 

 display window on or off. 

This window displays warnings, battery-remaining level,
sound volume, time data, and other information. 

When the 

 BACK TALLY switch is set on [ON], the

rear tally lamp behaves in the same way as the back
tally lamp. 

Error Code Indication (for more information, see 
[7-3 Warning System])

Battery-remaining level indication bar
For a battery with a digital indicator (percentage indication), if 
the remaining level of the battery is higher than 70%, all 
seven segments up to the “F” position are lit.
When the remaining level falls below 70%, the segments go 
out one-by-one for each drop of 10%. All seven segments 
can be set to light up when the battery-remaining balance is 
100%. To do so select “100%” for the menu option BATT 
REMAIN FULL in the <BATTERY/P2CARD> screen of the 
MAIN OPERATION page.

Audio channel level meter
When the MONITOR SELECT CH1/2 / CH3/4 switch is set 
to [CH1/2], the meter indicates 1 and 2 as the audio 
channel numbers, together with their audio levels. When 
the switch is set to [CH3/4], the meter indicates 3 and 4 as 
the audio channel numbers, together with their audio levels. 

Media-remaining space indication bar
The bar indicates the remaining free space on each P2 card, 
using a seven-segment display.
Each segment can represent either three or five minutes of 
remaining free space, depending on the value set through the 
menu option CARD REMAIN/

„. According to the set value, the 

segments disappear one-by-one. The menu option CARD 
REMAIN /

„ can be found in the <BATTERY/P2CARD> screen on 

the MAIN OPERATION page.   

Stays illuminated in LOOP REC mode. For
information about the LOOP REC mode, see [3-5
Loop Recording].

Stays illuminated when the menu option USB is set
to “ON”. The menu option USB can be found in the
<SYSTEM MODE> screen on the SYSTEM
SETTING page.

OP-SLOT: Remains illuminated when a video encoder card is

operated in the optional slot.

#,52%2 'PINKUJDQQMࡍ࡯ࠫ㧞㧜㧜㧢ᐕ㧡᦬㧝㧝ᣣޓᧁᦐᣣޓඦ೨㧥ᤨ㧠㧡ಽ