Panasonic AJSPC700P Benutzerhandbuch
34
Chapter 4 Adjustments and Settings for Recording
(continued)
4-2-3 Placing the Camera-recorder in
SYNCHRO SCAN Mode
To place the camera-recorder in SYNCHRO SCAN mode,
follow the steps below.
follow the steps below.
1
Press the SHUTTER switch positioned at [ON] towards
[SEL], to place the camera-recorder in SYNCHRO
SCAN mode.
[SEL], to place the camera-recorder in SYNCHRO
SCAN mode.
2
In SYNCHRO SCAN mode, the speed can be switched
seamlessly between 1/60.3 and 1/249.7 seconds, using
the SYNCHRO SCAN ADJUSTMENT buttons (+/–).
seamlessly between 1/60.3 and 1/249.7 seconds, using
the SYNCHRO SCAN ADJUSTMENT buttons (+/–).
4-3 Selecting Recording Signals
and Recording System
The AJ-SPC700P is capable of utilising user-selected
recording signals and format.
recording signals and format.
4-3-1 Selecting the Recording Signals
Signals to be recorded are selected through the menu
options REC SIGNAL and CAMERA MODE. These options
are found in the <SYSTEM MODE> screen, which is
accessible from the SYSTEM SETTING page.
options REC SIGNAL and CAMERA MODE. These options
are found in the <SYSTEM MODE> screen, which is
accessible from the SYSTEM SETTING page.
Setting options and usage
The option REC SIGNAL is used to select signals to be
recorded.
recorded.
CAM:
Signals from the camera are recorded.
VIDEO: Signals from the GENLOCK IN connector are
recorded.
1394:
Signals from the DVCPRO/DV connector are
recorded. (when the IEEE1394 interface board
is attached).
recorded. (when the IEEE1394 interface board
is attached).
<Note>
When “VIDEO” is selected for the menu option REC
SIGNAL, non-standard signals output from the GENLOCK
IN connector, may degrade video quality.
SIGNAL, non-standard signals output from the GENLOCK
IN connector, may degrade video quality.
4-3-2 Selecting the Recording System
The recording format is selected through the option menu
REC MODE.
The aspect ratio is selected through the menu option
ASPECT.
These options are found in the <SYSTEM MODE> screen,
which is accessible from the SYSTEM SETTING page.
REC MODE.
The aspect ratio is selected through the menu option
ASPECT.
These options are found in the <SYSTEM MODE> screen,
which is accessible from the SYSTEM SETTING page.
Details of the option REC MODE
50M: Video is recorded in the DVCPRO50 format (50
Mbps).
25M: Video is recorded in the DVCPRO format (25
Mbps).
DV:
Video is recorded in the DV format.
Details of the option ASPECT
16:9: Video is recorded with an aspect ratio of 16:9.
4:3:
4:3:
Video is recorded with an aspect ratio of 4:3.
SHUTTER switch
SYNCHRO SCAN ADJUSTMENT buttons (+/–)
ޓޓ6<67(002'(!
5(&6,*1$/&$0
5(&02'(0
$63(&7
6(783$
5(&7$//<5('
$&&(66/('21
86%2))
5(&02'(0
$63(&7
6(783$
5(&7$//<5('
$&&(66/('21
86%2))
#,52%2
'PINKUJDQQMࡍࠫ㧞㧜㧜㧢ᐕ㧡㧝㧝ᣣޓᧁᦐᣣޓඦ೨㧥ᤨ㧠㧡ಽ