Panasonic AJSPC700P Benutzerhandbuch

36

To adjust the recording levels for Audio Channels 1 and 2,
follow the steps below.

Position the MONITOR SELECT  CH1/2 / CH3/4-
selector switch at CH1/2 so that the audio level meter
on the display window will provide CH1 and CH2
indications. Ensure that the channel indications
displayed in the window are 1 and 2. 
Whether to enable or disable the FRONT AUDIO
LEVEL control must be preset through menu options
FRONT VR CH1 and FRONT VR CH2. Note that this
control is factory-disabled.
The menu options are found in the MIC/AUDIO1
screen, which is accessible from the MAIN
OPERATION page.

Position the AUDIO SELECT CH1/CH2 switch at
[MAN]. 

While checking the audio channel level meter in the
display window or the audio level meter in the
viewfinder, adjust the AUDIO LEVEL CH1/CH2 control.
Note that if the level exceeds the top bar (0 dB), the
word OVER illuminates to show that the input level is
excessive. The adjustment made in such a way that the
maximum level will not reach the 0 dB bar. 

When operating the AJ-SPC700P without a sound recordist,
it is recommended that the FRONT AUDIO LEVEL control
should be used to adjust the audio level. 
In advance, check the level meter in the viewfinder screen
and use the AUDIO LEVEL control to adjust the appropriate
audio channel so that no excessive audio signals will be
admitted.

         F:1----            

         R:2---- ---+

w
w

#,52%2 'PINKUJDQQMࡍ࡯ࠫ㧞㧜㧜㧢ᐕ㧡᦬㧝㧝ᣣޓᧁᦐᣣޓඦ೨㧥ᤨ㧠㧡ಽ