Panasonic AJSPC700P Benutzerhandbuch

97

The following error codes are displayed in the display
window if an error occurs in the camera: 

One of the bars in the battery remaining
indicator starts blinking. 

Blinks once per second. 

Blinks once per second. 

The BATT LED blinks. 

Beeps 4 times per second. 

The battery is about to run out. 

Continues to operate. 

Replace the battery as required. 

One of the bars for remaining MEDIA
capacity starts blinking. 

Blinks once per second while recording
continues. 

Blinks once per second while recording
continues. 

The P2 card remaining capacity indicator
blinks. 

Beeps once per second while recording
continues. 

The total remaining capacity of all the P2
cards is two minutes or less. 

Continues to operate. 

Replace the cards. If there is an empty card
slot, insert a new card. 

If the error occurs during recording,
“00:0000:11” appears as the time code
indication. The indication continues to flash
after recording is stopped and until the next
operation is performed. There is no
indication if the error occurs during playback.

If the error occurs during recording, the lamp
flashes four times per second for a period of
about three seconds. The lamp does not
light if the error occurs during playback.

If the error occurs during recording, the lamp
flashes four times per second for a period of
about three seconds. The lamp does not
light if the error occurs during playback.

A flashing “CARD ERR 

_” appears. In the

actual indication the 

_ is replaced by the slot

number of the P2 card that triggered the
error.

If the error occurs during recording, the tone
sounds four times per second for a period of
about three seconds. The tone does not
sound if the error occurs during playback.

An error has occurred while recording data
to or playing data from a P2 card.

Stop recording or playback.

Replace the affected P2 card.

E-11

Video initialisation error

E-27

Recording control error

E-30

P2 card removal error

E-38

P2 streaming microcontroller error

E-3F

Microprocessor error in the camera control circuit. 

E-6F

Reference signal error. 

#,52%2 'PINKUJDQQMࡍ࡯ࠫ㧞㧜㧜㧢ᐕ㧡᦬㧝㧝ᣣޓᧁᦐᣣޓඦ೨㧥ᤨ㧠㧡ಽ