Manualsbrain.com
  1. Handbücher
  2. Marken
  3. Panasonic
  4. F0707K0 -M
  5. Benutzerhandbuch

Panasonic F0707K0 -M Benutzerhandbuch

Download
Seite von 92
58
Copying data from P2 cards to the hard drive (1394 HOST mode)
Switching to the 1394 HOST mode
1
  Turn on the power of the hard drive (which 
supports 1394. a SBP2) to be connected, 
connect it to the unit using the IEEE1394 
cable, and hold down [POWER] on the unit 
for at least 2 seconds to turn on its power.
The thumbnail screen now appears.
2
  Press [MODE] to display the thumbnail 
display off screen.
3 
Press [MENU].
4
  Using [STOP], [PLAY] and [STILL], select 
“OTHER FUNCTIONS” – “PC MODE”, and 
press [STILL].
5
  Using [STOP] and [PLAY], select “1394 
HOST”, and press [STILL].
6
  Press [MENU] twice to display the thumbnail 
display off screen.
7
  Press [MODE] to display the thumbnail 
display screen.
8
  Hold down [MODE] for at least 2 seconds.
The 1394 HOST mode screen now appears.
1
2
5
3
4
6
1.  Mode display
1394 HOST mode is 
displayed here.
2.  
P2 card slot 
number
The numbers of the P2 card 
slots where P2 cards have 
been inserted are displayed 
in white.
3.  
Hard drive status 
display
The status is displayed 
in white if the hard drive 
is connected and can be 
used, in black when it is 
not connected, and in red 
when data cannot be copied 
because of its formatting or 
other reasons. If you plan to 
copy data onto a hard drive 
indicated in red, format the 
hard drive first.
4.  
Remaining 
battery charge
The remaining battery 
charge is displayed here.
5.  
Remaining hard 
drive memory 
display
The remaining memory and 
total memory of the hard 
drive are displayed here. “-/-” 
indicates that the hard drive 
is not connected.
6.  Menu display
The menu used in the 1394 
HOST mode is displayed 
here.
•  Connect the unit and the hard drive using the 
1394 cable. Do not connect (using a chain or 
hub, for instance) a multiple number of hard 
drives even if no power is being supplied (to the 
chain or hub).
 
Formatting the hard drive
1
  Using [STOP] and [PLAY], select “FORMAT 
(HDD)”, and press [STILL].
Then select “YES” using [STOP], and press 
[STILL]. Formatting now begins. (Formatting 
will be completed in about 2 or 3 seconds.)
2
  Select YES, and press [STILL].
3
  When the confirmation message appears 
again, select “YES”, and press [STILL].
COPY TO HDD
FORMAT (HDD)
PROPERTY
SETUP
Formatting now begins.
•  Bear in mind that all the data will be erased on 
the hard drive being formatted.