Manualsbrain.com
  1. Handbücher
  2. Marken
  3. Panasonic
  4. F0707K0 -M
  5. Benutzerhandbuch

Panasonic F0707K0 -M Benutzerhandbuch

Download
Seite von 92
60
Editing the P2 card data (USB DEVICE mode/1394 DEVICE mode)
You can connect a personal computer to the unit using a USB cable (for a Windows machine) or a 1394 
cable (for a Macintosh machine), and operate the image data on the unit’s P2 card from the computer.
Editing by means of external devices
Editing in the USB device mode.
Before editing in the USB device mode, refer to “The following conditions must be met when using a USB 
connection” on page 52.
1 
Hold down [POWER] for at least 2 seconds 
to turn the power on.
The thumbnail screen now appears.
2 
Press [MODE] to display the thumbnail 
display off screen.
3 
Press [MENU].
4 
Using [STOP], [PLAY] and [STILL], select 
“OTHER FUNCTIONS” – “PC MODE”, and 
press [STILL].
5 
Using [STOP] and [PLAY], select “USB 
DEVICE”, and press [STILL].
6 
Press [MENU] twice to display the thumbnail 
display off screen.
7 
Hold down [MODE] for at least 2 seconds.
After “USB DEVICE” is displayed, “USB 
DEVICE CONNECT” is displayed once the file 
access enable status is established.
•  The mode cannot be changed or menus 
displayed while the USB device mode is 
established.
USB DEVICE
USB DEVICE
CONNECT
8 
Edit the data on the P2 card using the 
personal computer.
9 
After the data has been edited, disconnect 
the USB cable.
The display on the LCD monitor changes from 
“USB DEVICE CONNECT” to “USB DEVICE 
DISCONNECT.”
•  When disconnecting the cable, perform the 
“safe removal of hardware” procedure at the 
personal computer.
AG-HPG1
0
1394 cable (optional accessory)
For a Macintosh computer
USB cable 
(optional accessory)
For a personal computer 
running Windows
Personal 
computer
USB 2.0 connector 
(Type B)
IEEE1394 input/output 
connector
This unit