Panasonic PV-GS59 Benutzerhandbuch

Seite von 92
Playback Mode
51
A/V
Playing Back on Your TV
By connecting your Camcorder with your TV, the 
recorded scenes can be viewed on your TV screen.
•  Before connecting them, turn off the power of both 
the Camcorder and TV.
1
  Insert a recorded tape into this 
Camcorder.
2
  Connect the [AV OUT] Jack of the 
Camcorder and the Video and Audio Input 
Jacks of the TV.
•  Connect to the TV with the AV Cable 
1
.
[VIDEO IN]
[AUDIO IN]
1
3
  Turn on this Camcorder and set the Mode 
Dial to the Tape Playback Mode.
4
  For PV-GS39/PV-GS59 users :
Set [   SETUP] >> [ 
 TV ASPECT] >> 
[4:3] or [16:9].
5
  Select the input channel on the TV.
6
  Move the Joystick Control [▲] to 
select the [   ] to start playback.
•  The image and audio are output on 
the TV.
7
  Move the Joystick Control [▼] to select 
the [   ] to stop playback.
„
 If the image or audio from this 
Camcorder is not output on the TV
•  Check that the plugs are inserted as far as they 
go.
•  Check the [12 bit AUDIO] settings.
•  Check the connected terminal.
•  Check the TV’s input setting (input switch). (For 
more information, please read the operating 
instructions for the TV.)
•  When the formatting is completed, the screen 
becomes gray.
Notes:
•  Normally, it is not necessary to format the card. If 
a message appears even though you insert and 
remove the card several times, format it.
•  In order to maintain full compatibility, you must 
format the SD Memory Card using the Camcorder.
•  PC formatted SD Memory Cards are not compatible 
with the Camcorder.
•  The Camcorder supports SD Memory Cards 
formatted in FAT12 system (for SD Memory Card 
of 8, 16, 32 and 64 MB) and FAT16 system (for 
SD Memory Card of 128, 256, 512 MB, 1 GB and 
2 GB).
 Formatting a Card 
(For PV-GS39/PV-GS59)
If a Card becomes unreadable by the Camcorder, 
format it for reuse. Formatting erases all the data 
recorded on a Card.
•  When formatting the card all protected files 
(lock) are also deleted.
• Set to Picture Playback Mode.
•  The One-Touch Navigation icon is displayed on the 
lower right of the screen.
1
 Set 
[   ADVANCED] >> [   FORMAT 
CARD] >> [YES].
•  A confirmation message appears, select [YES] 
and formatting will be carried out.
Notes:
•  The Lock Setting carried out by this Camcorder is 
only effective for this Camcorder.
•  The SD Memory Card has a write protection switch 
on it. If the switch is moved to the [LOCK] side, you 
cannot write to or format the Card. If it is moved 
back, you can.
FORMAT CARD
SETUP   ENTER    EXIT
YES
NO
DELETES ALL DATA