Panasonic PV-GS59 Benutzerhandbuch
Editing Mode
53
Recording from a Tape onto a Card
(For PV-GS39/PV-GS59)
(For PV-GS39/PV-GS59)
Still pictures can be recorded on the Memory Card
from scenes that have already been recorded on a
cassette.
from scenes that have already been recorded on a
cassette.
1
Set the Mode Dial to Tape Playback Mode.
• The One-Touch Navigation icon is displayed
on the lower right of the screen.
Audio Dubbing
(PV-GS59 Only)
(PV-GS59 Only)
You can add music or narration to the recorded
Cassette.
• If the tape recorded in the [16bit] Mode is dubbed
Cassette.
• If the tape recorded in the [16bit] Mode is dubbed
with the Audio Dubbing function, the original sound
is erased. (If you wish to preserve the original
sound, use the [12bit] Mode when recording.)
is erased. (If you wish to preserve the original
sound, use the [12bit] Mode when recording.)
• Audio Dubbing cannot be performed on a recording
made in LP Mode. (p. 29)
• Set to Tape Playback Mode.
1
Find a scene that you want to add sound
to, and press the [ ] Button on the
Remote Control.
Remote Control.
To Play Back the Sound Recorded by
12bit Audio Dubbing
Set [ SETUP] >> [ 12bit AUDIO] >> [ST1],
[ST2] or [MIX].
[ST2] or [MIX].
ST1:
It plays back only the original sound.
ST2:
It plays back only the sound added by
Audio Dubbing.
Audio Dubbing.
MIX:
It plays back both the original sound
and the sound added by Audio Dubbing
simultaneously.
and the sound added by Audio Dubbing
simultaneously.
Editing Mode
2
Insert a tape which already has recorded
contents and a card.
3
Move the Joystick Control [▲] to start
playback and set the Camcorder to Still
Playback Mode at the scene you wish
to record, and press the [PHOTO SHOT]
Button.
Playback Mode at the scene you wish
to record, and press the [PHOTO SHOT]
Button.
Before Recording with Audio Dubbing
• Set to Tape Recording Mode
• When you want to preserve the original sound
• When you want to preserve the original sound
taken during recording, set [ ADVANCED]
>> [ AUDIO REC] >> [12bit] to take pictures.
(When set [16bit], the sounds taken during
recording are erased after recording with audio
dubbing.)
>> [ AUDIO REC] >> [12bit] to take pictures.
(When set [16bit], the sounds taken during
recording are erased after recording with audio
dubbing.)
• Set [ BASIC] >> [ REC SPEED] >> [SP] to
take pictures.
2
Press the [AUDIO DUB] Button on the
Remote Control.
• The [
] Indication appears.
3
To start Audio Dubbing, press the [ ]
Button on the Remote Control. Or, move
the Joystick Control [▲] to select [ ].
the Joystick Control [▲] to select [ ].
• The [
] Indication appears.
• Talk into the microphone.
Note:
• If you press the [PHOTO SHOT] Button without
pausing, blurred pictures may be recorded.
Notes:
• The blank section of a tape cannot be dubbed.
• Sounds sent through the DV terminal cannot be
• Sounds sent through the DV terminal cannot be
dubbed.
• If a tape has a non-recorded portion when the tape
is dubbed, images and sounds may be disturbed
when this portion of the tape is played back.
when this portion of the tape is played back.
• In the case of importing data recorded with Audio
Dubbing to a PC using the PC’s software, only the
original sound (ST1) may be imported, depending
on the software.
original sound (ST1) may be imported, depending
on the software.
[One-Touch Navigation icon]
• During Audio Dubbing, it is automatically set to
[ST2].
• Audio will not be recorded.
4
Press the [ ] Button on the Remote
Control to stop audio dubbing. Or, move
the Joystick Control [▲] to select [ ]
again.
the Joystick Control [▲] to select [ ]
again.
• The Camcorder is in the Still Playback Mode
again.
S P 3 h 5 9 m 5 9 s 2 9 f
R 2 : 0 0
1 2 : 3 4 : 5 6 A M
J A N 2 2 0 0 6
J A N 2 2 0 0 6