Panasonic AG-HPX600P Benutzerhandbuch
– 124 –
Chapter 7 Menu Operations — Menu list
[SYSTEM SETUP] screen
Item
Description of settings
Remark
SYSTEM MODE
Sets the signal format of the camera.
[1080-59.94i], [1080-23.98PsF] (OP4), [1080-50i], [720-59.94P], [720-50P],
[480-59.94i], [576-50i]
f
[TURN POWER OFF] is displayed when the setting is changed. Turn off the
power of the camera once, and turn it on again.
f
This setting is not available in USB device mode.
f
This setting is not available when clip connection
is underway with one-clip recording.
f
The factory settings may differ depending on the
region.
(AG-HPX600P: [1080-59.94i], AG-HPX600EJ:
(AG-HPX600P: [1080-59.94i], AG-HPX600EJ:
[1080-50i], AG-HPX600EN: [1080-50i])
f
When OP4 is not installed
The [1080-23.98PsF] setting item is grayed out
The [1080-23.98PsF] setting item is grayed out
and cannot be selected.
REC SIGNAL (OP2)
Selects the input signal. The [SDI IN] item can be selected when the HD/SD SDI
input board (extra-cost option) is installed.
f
This item is not displayed when [SYSTEM MODE]
is [1080-23.98PsF].
f
When [SDI IN] is selected, images are recorded
with 60i or 50i regardless of the [REC FORMAT]
setting.
f
This setting is not available when clip connection
is underway with one-clip recording.
[CAMERA]
Records camera shooting signals of the camera.
[SDI IN]
Records input signals to <SDI OUT/IN (OP)> terminal.
f
It is always set to [CAMERA] when the power is turned on.
REC FORMAT
Selects the recording codec, and shooting and recording modes.
f
When [REC SIGNAL] is [SDI IN], recording is
performed in a normal mode (60i or 60P) even if
the native recording is selected.
f
This setting is not available in USB device mode.
f
This setting is not available when clip connection
is underway with one-clip recording.
r
When [SYSTEM MODE] is [1080-59.94i]
[AVC-I100/60i],
[AVC-I100/30PN],
[AVC-I100/24PN]
Recorded using the AVC-I 100 codec. 60i, 30PN (native
recording), and 24PN (native recording) are used for shooting
and recording, respectively.
[AVC-I50/60i],
[AVC-I50/30PN],
[AVC-I50/24PN]
Recorded using the AVC-I 50 codec. 60i, 30PN (native
recording), and 24PN (native recording) are used for shooting
and recording, respectively.
[DVCPROHD/60i] Recorded using the DVCPRO HD codec. Shooting mode can
be set at the [CAMERA MODE] item. Recording is fixed to 60i.
r
When [SYSTEM MODE] is [720-59.94P]
[AVC-I100/60P],
[AVC-I100/30PN],
[AVC-I100/24PN]
Recorded using the AVC-I 100 codec. 60i, 30PN (native
recording), and 24PN (native recording) are used for shooting
and recording, respectively.
[AVC-I50/60P],
[AVC-I50/30PN],
[AVC-I50/24PN]
Recorded using the AVC-I 50 codec. 60i, 30PN (native
recording), and 24PN (native recording) are used for shooting
and recording, respectively.
[DVCPROHD/60P],
[DVCPROHD/30PN],
[DVCPROHD/24PN]
Recorded using the DVCPRO HD codec. 60P, 30PN (native
recording), and 24PN (native recording) are used for shooting
and recording, respectively.
r
When [SYSTEM MODE] is [480-59.94i]
[DVCPRO50/60i],
[DVCPRO/60i],
[DV/60i]
Recorded using the DVCPRO50, DVCPRO, and DV codec,
respectively. Shooting mode can be set with the [CAMERA
MODE] item. Recording is fixed to 60i.
r
When [SYSTEM MODE] is [1080-23.98PsF] (*OP4)
[AVC-I100/24PN] Recorded using the AVC-I 100 codec. 24PN (native recording)
is used for shooting and recording.
[AVC-I50/24PN] Recorded using the AVC-I 50 codec. 24PN (native recording) is
used for shooting and recording.
REC FORMAT
r
When [SYSTEM MODE] is [1080-50i]
f
When [REC SIGNAL] is [SDI IN], recording is
performed in a normal mode (50i or 50P) even if
the native recording is selected.
f
This setting is not available in USB device mode.
f
This setting is not available when clip connection
is underway with one-clip recording.
[AVC-I100/50i],
[AVC-I100/25PN]
Recorded using the AVC-I 100 codec. 50i and 25PN (native
recording) are used for shooting and recording, respectively.
[AVC-I50/50i],
[AVC-I50/25PN]
Recorded using the AVC-I 50 codec. 50i and 25PN (native
recording) are used for shooting and recording, respectively.
[DVCPROHD/50i] Recorded using the DVCPRO HD codec. Shooting mode can
be set with the [CAMERA MODE] item. Recording is fixed to
50i.
r
When [SYSTEM MODE] is [720-50P]
[AVC-I100/50P],
[AVC-I100/25PN]
Recorded using the AVC-I 100 codec. 50P and 25PN (native
recording) are used for shooting and recording, respectively.
[AVC-I50/50P],
[AVC-I50/25PN]
Recorded using the AVC-I 50 codec. 50P and 25PN (native
recording) are used for shooting and recording, respectively.
[DVCPROHD/50P],
[DVCPROHD/25PN]
Recorded using the DVCPRO HD codec. 50P and 25PN (native
recording) are used for shooting and recording, respectively.
r
When [SYSTEM MODE] is [576-50i]
[DVCPRO50/50i],
[DVCPRO/50i],
[DV/50i]
Recorded using the DVCPRO50, DVCPRO, and DV codec,
respectively. Shooting mode can be set with the [CAMERA
MODE] item. Recording is fixed to 50i.
indicates factory setting values.