Panasonic AG-HPX600P Benutzerhandbuch

– 125 –

CAMERA MODE

Sets the camera shooting mode when set to [1080-59.94i], [480-59.94i], 

[1080-50i], and [576-50i].

 

f

Displayed only when the [SYSTEM MODE] item 

is set to [1080-59.94i], [1080-50i], [480-59.94i], or 

[576-50i].

 

f

This setting is not available in the following cases:
-  The [REC SIGNAL] item is set to [SDI IN].

-  The [SYSTEM MODE] item is set to 

[1080-59.94i], and the [REC FORMAT] item is 

set to other than [DVCPROHD/60i].

-  [SYSTEM MODE] is set to [1080-50i], and 

the [REC FORMAT] item is set to other than 

[DVCPROHD/50i].

-  Clip connection is underway with one-clip 

recording.

r

r

SCAN REVERSE

Compensates image inversion that occurs when a lens for filming or anamorphic 

lens is mounted.

ASPECT CONV

Selects aspect ratio for images recorded with 480i or 576i.

 

f

This setting is not available when the [SYSTEM 

MODE] item is [1080-59.94i], [1080-23.98PsF], 

[1080-50i], [720-59.94P], or [720-50P].

 

f

This setting is not available when clip connection 

is underway with one-clip recording.

Side-crop mode (Crops the left and right edges.)

[LETTER BOX] Letterbox mode (Adds black bands at the top and bottom of the 

image.)

Squeeze mode (Squeezes images horizontally.)

SETUP

Sets the setup level of video signals for 480i.

 

f

This item is not displayed when the [SYSTEM 

MODE] item is set to [1080-50i], [720-50P], or 

[576-50i].

Composite output and recording setup levels will both be set 

to 0%.

Composite output setup level will be set to 7.5%, while 

recording setup level will be set to 0%.

         indicates factory setting values.

LOW GAIN

Sets the gain value assigned to the L position of the <GAIN> switch.

[−3dB], [0dB], [3dB], [6dB], [9dB], [12dB]

MID GAIN

Sets the gain value assigned to the M position of the <GAIN> switch.

[−3dB], [0dB], [3dB], [6dB], [9dB], [12dB]

HIGH GAIN

Sets the gain value assigned to the H position of the <GAIN> switch.

[−3dB], [0dB], [3dB], [6dB], [9dB], [12dB]

ATW

Assigns the auto tracking white balance function to the <WHITE BAL> switch. 

 

f

When the <WHITE BAL> switch is set to the 

<B> position and this menu is set to [Bch], 

pressing the <USER> buttons (<USER 

MAIN>/<USER1>/<USER2>) to which the auto 

tracking white balance function is assigned 

does not turn off the auto tracking white balance 

function.

Activates the auto tracking white balance function when the 

<WHITE BAL> switch is set to the <B> position.

Does not assign the auto tracking white balance function to the 

<WHITE BAL> switch.

W.BAL.PRESET

Sets the color temperature assigned to the <PRST> position of the <WHITE BAL> 

switch.

Each time the <AUTO W/B BAL> switch is pushed towards the <AWB> side, 

color temperature can be switched to 3200 K, 5600 K, and user-specified variable 

value.

 

f

The color temperature when [VAR] is selected is 

set at the [CAM03:SETUP] screen of SmartUI.

USER MAIN

 

f

[SPOT LIGHT] and [BACK LIGHT] functions 

do not work when the remote control unit 

(AJ-RC10G) or the extension control unit 

(AG-EC4G) is connected.

 

f

When the dynamic range stretcher function is 

activated, the digital zoom function is disabled.

USER1

Sets the function assigned to the <USER1> button.

The setting contents are the same as [USER MAIN].

[BACK LIGHT] (page 60)

USER2

Sets the function assigned to the <USER2> button.

The setting contents are the same as [USER MAIN].

[TEXT MEMO] (page 60)

RET SW

Sets the function assigned to the <RET> button of lens.

 

f

The function assigned to the <RET> button does not work when [INHIBIT] is 

selected.

 

f

When an auto-focus compatible lens is not 

attached, the operation is disabled even if [PUSH 

AF] is selected.

         indicates factory setting values.