Panasonic AG-HPX250EN Benutzerhandbuch
113
Editing
1. PARTITION
This section indicates the type of the hard disk
drive.
The available functions depend on the type of
hard disk drive.
drive.
The available functions depend on the type of
hard disk drive.
HDD type
Feature
Available functions
TYPE S A special format that
allows high-speed
writing and writing back
on a card-by-card basis.
A drive formatted with
the camera-recorder
uses this format.
Thumbnail viewing,
writing and writing back
on a card basis, writing
back on a clip basis,
and formatting
P2
STORE
P2 STORE (AJ-
PCS060G).
No writing can be
performed.
Thumbnail viewing,
writing back on a card
basis, and writing back
on a clip basis
FAT
For a hard disk drive
with the first primary
partition formatted in
FAT 16 or 32, as seen
on personal computers,
etc., which requires a
CONTENTS directory at
its root.
Thumbnail viewing,
reading on a clip basis,
and formatting
* Once formatted, the
hard disk drive can be
treated as a TYPE-S
HDD.
OTHER Hard disk drives not
described above.
* They are hard disk
drives that have no
CONTENTS directory or
use the NTFS and any
other file system instead
of FAT 16 or 32.
Formatting
* Once formatted, they
can be treated as a
TYPE-S HDD.
2. VENDOR
This section indicates the vendor for the hard
disk drive.
disk drive.
3. MODEL
This section indicates the model of the hard disk
drive.
drive.
4. SIZE
This section indicates the total storage on the
hard disk drive.
hard disk drive.
5. USED
This section indicates the used space on the
hard disk drive (in GB) and the number of P2
cards in use.
hard disk drive (in GB) and the number of P2
cards in use.
6. FREE CAP.
This section indicates the remaining free space
on the hard disk drive in GB.
on the hard disk drive in GB.
7. PARTITION #
This section indicates the partition number (one
P2 card is used as a unit) on the hard disk drive.
P2 card is used as a unit) on the hard disk drive.
The screen can show up to 10 partitions.
If there are more than 10 partitions, push
the Operation lever in the ▼ direction
and scroll down to display the remaining
partitions.
8. MODEL
This section indicates the model of the P2 card
that originally contained data on the partition.
that originally contained data on the partition.
You can switch to PARTITION NAME by
pushing the Operation lever in the ►
direction. Push the Operation lever in the
◄ direction to return to the original model
name display.
9. DATE/TIME
This section indicates the date and time the
data on the partition was recorded.
data on the partition was recorded.
10. SERIAL
This section indicates the serial number of the
P2 card that originally contained the data on
the partition.
P2 card that originally contained the data on
the partition.
(Continued on the next page)