Panasonic AG-HPX250EN Benutzerhandbuch

112

Using a hard disk drive (PC mode: USB host) (continued)

Using the USB HOST mode

Usable hard disk drives

• Hard disk drives connectable via USB 2.0
• The units compatible with the storage unit that

has Panasonic USB I/F
Refer to the support site at the following Website
for the compatible units.

http://pro-av.panasonic.net/

• While the USB HOST mode supports USB

bus power (5 V, 0.5 A), some hard disk

drives may not activate. If this is the case,

power must be supplied in a different way.

• Do not connect more than one drive even

through a hub or any other device. Even

with devices other than a hard disk drive,

do not connect to the drive together with

the hard disk drive through a hub.

• The unit does not support a hard disk drive

of 2 TB (2048 GB) or more.

• To prevent copying or formatting problems

from occurring during connection to a

hard disk drive, be sure that the camera’s

battery is sufficiently charged or use the

AC adaptor.

• Versions 2.** and later of the P2 STORE

(AJ-PCS060G) support USB host mode for

this unit.

Versions 1.** cannot connect. Please

upgrade.

Viewing hard disk drive information

You can view the information on the hard disk drive
connected via USB with the following steps.

Switch the mode to USB HOST.

• “Switching to the USB HOST mode” (Page 111)
• The thumbnail screen is displayed.

(USB HOST is displayed in the bottom right.)

Connect the hard disk drive to the camera-

recorder via USB 2.0.

Press the MENU button and select HDD →

EXPLORE from the thumbnail menu.

The screen provides the information about the
hard disk drive.

For Type S or P2 STORE

Press the EXIT button. ↑↓ Press the SET button.

For the FAT

Press the EXIT button. ↑↓ Press the SET button.