Panasonic AG-HPX250EN Benutzerhandbuch

Seite von 170
83
Playback
4
  With the pointer at the bottom, push the 
Operation lever in the ◄ ► direction and 
position it on the text memo number you 
wish to play back then push the Operation 
lever in the ▲ direction (► playback).
• Playback will start from the time code
position of the text memo where the pointer
is located. If the Opetation lever in the 
direction (STOP) is pressed during playback
or the playback has finished at the end of
the clip, then the thumbnail screen appears
again with the pointer replaced with the text
memo where the playback started.
• Press the MENU button to select EXIT or
press the EXIT button to return the pointer to
the upper part of the thumbnail screen.
• Pressing the START/STOP button in the 
text memo screen will not start recording.
• For AVC-Intra format clips that cannot be 
played back, text memo thumbnails cannot 
be displayed, and may be shown as a   
icon.
Deleting a text memo
1
  Select the desired text memo by carrying 
out steps 1–3 for “Playing back a clip at the 
position where a text memo is recorded” 
(Left).
2
  Move the pointer to the desired text 
memo, and then press the SET button on 
Operation lever.
3
  Press the MENU button to select 
OPERATION → DELETE from the thumbnail 
menu. 
A YES/NO screen appears to confirm that you
wish to delete. Select YES with the Operation
lever to delete the text memo.
Playing back a clip at the position 
where a text memo is recorded
1
  Turn the POWER/MODE switch to set to PB/
THUMBNAIL mode. 
The thumbnail screen appears on the LCD
monitor.
2
  Press the MENU button and select 
THUMBNAIL → TEXT MEMO CLIPS from 
the thumbnail menu.
The clip thumbnails with text memos attached
are displayed in the upper section of the LCD
monitor. The lower section of the LCD monitor
shows information about the text memo on the
clip selected by the pointer.
Shows the still image that the 
text memo is related to.
Thumbnail 
Display
Selected text memo clips 
(blue) and total clips (white)
3
  Move the pointer over the clip that contains 
the desired text memo to playback and 
press the SET button on Operation lever.
The pointer moves to the lower part of the LCD
monitor.
The pointer moves down.