Panasonic AG-HPX250EN Benutzerhandbuch

Using a text memo to break a clip and

copy the necessary portion

Select a desired text memo in a clip by

carrying out steps 1-3 for “Playing back a

clip at the position where a text memo is

recorded” (Page 83).

Move the pointer to the desired text memo,

and then press the SET button on the

Operation lever.

You can select more than one text memo.

Press the MENU button to select

OPERATION → COPY.

User the Operation lever and SET buttons

to select the destination slot. Then, select

YES.

• Copying starts.
• The portion between the selected text memo

and the next one is copied. If no text memo
is found after the selected one, then all part
after the selected text memo is copied.

• If multiple text memos are selected, the

selected sections are copied.

• When the clip is being copied, the camera-

recorder indicates the progress of the
copy process and cancellation status. To
discontinue the copy process, press the SET
button on the Operation lever. Then, a YES/
NO confirmation screen is displayed. Use the
Operation lever to select YES.

In clip division and copying using the text

memo function, the area copied may be

automatically modified depending on the

recording format of the clip.

Deleting clips

Turn the POWER/MODE switch to set to PB/

THUMBNAIL mode.

The thumbnail screen appears on the LCD
monitor.

Push the Operation lever in the ◄ ►

direction and position it on the clip you

wish to delete. Press SET on the Operation

lever to select the clip.

Multiple clips can be selected.

Press the MENU button and select

OPERATION → DELETE from the thumbnail

menu.

The following screen appears. Use the

Operation lever to select YES.

The clip is deleted. All selected clips (in blue-
green frames) are deleted by this operation.

To interrupt deleting, press the SET button on

the Operation lever to cancel the operation.

Partially deleted clips cannot be restored by

canceling.

Thumbnail operations (continued)