Panasonic AG-HPX250EN Benutzerhandbuch
91
Playback
Example of recording (DVCPRO HD) a clip on
one P2 card:
Recording pause
REC start
Recording duration = Approx. 7 min.
Clip 1
COUNT value
= 0001
Clip 2
COUNT value
= 0002
5 min.
2 min.
Example of recording a clip on two P2 cards:
Recording pause
REC start
Clip 1
COUNT value
= 0003
Clip 2
COUNT value
= 0004
1st card
2nd card
If the clip thumbnails are displayed as shown in the
example above or their properties are indicated
using a P2 device, the thumbnail and COUNT
value of clip 1 will be displayed.
example above or their properties are indicated
using a P2 device, the thumbnail and COUNT
value of clip 1 will be displayed.
Clear the uploaded metadata
Select META DATA → INITIALIZE from the
thumbnail menu, and press the SET button on the
Operation lever. A YES/NO confirmation screen
asks you to confirm that you want to initialize.
Select YES using the Operation lever to initialize
META DATA and clear the data read.
thumbnail menu, and press the SET button on the
Operation lever. A YES/NO confirmation screen
asks you to confirm that you want to initialize.
Select YES using the Operation lever to initialize
META DATA and clear the data read.
Formatting a P2 card
1
Turn the POWER/MODE switch to set to PB/
THUMBNAIL mode.
The thumbnail screen appears on the LCD
monitor.
monitor.
2
Press the MENU button and select
OPERATION → FORMAT from thethumbnail
menu.
• When the screen shown below appears,
select the slot number of the P2 card you
want to format and press the SET button on
the Operation lever.
want to format and press the SET button on
the Operation lever.
• Select EXIT if formatting is not required.
3
The following screen appears. Use the
Operation lever to select YES.
The selected P2 card is formatted.
Check that no important data remains on a
card before formatting since data erased by
formatting cannot be recovered.