Panasonic AG-AC130P Benutzerhandbuch

76

The main warning displays appearing on the LCD monitor or viewfinder are as follows. If a warning display 
is not listed, carefully check the message displayed.

„

If you format the memory card, all the recorded 

data will be deleted. (Including AVCHD clips.) 

Do you format the memory card? (SLOT1)

„

Cannot be used because the standard for the data 

is different.

Clip cannot be deleted.

Clip cannot be deleted.

No playback is possible.

No playback is possible.

This memory card cannot be recorded to in PH 

mode or HA mode.

The maximum number of clips has been reached 

and no further clips can be recorded.

No further indexes can be set because the number 

of indexes will exceed the maximum limit.

PRE-REC cannot be set because the remaining 

memory card capacity is low.

The memory card door is open.

Formatting has failed. This memory card needs to 

be reformatted.

The memory card is full.

Please check the memory card.

If a memory card that has been used before in 

another device or computer is used for the first 

time in this camera, [CHECK CARD.] is displayed, 

and all operations may be disabled.

In such a case, perform the following:

1) Remove the memory card from the camera and 

insert it again. (Page 15) 

The camera recognizes the memory card and 

cancels the [CHECK CARD.] display.

2) If the [CHECK CARD.] display is not disappeared 

even after removing and inserting the memory 

card several times, check the contents of the 

memory card on a computer, and erase all the 

data.

3) Format the memory card with the camera. 

(Page 13)

If the data on the memory card cannot be either 

read or erased on a computer, the memory card 

may be damaged. Use another memory card.

An error has been detected in the control 

information.

„

When turning off the power, disconnect the USB 

connection cable.

„

Displayed when the writing speed of the memory 

card in use is slow and recording may not be 

performed.