Panasonic AG-AC130P Benutzerhandbuch

Seite von 106
77
Displays
 
 
„
N
[NO CARD]
No memory card is inserted.
 
„
R
[REPAIR CLIP?]
Do you wish to repair clips now?
 
„
S
[SET DATE AND TIME]
Set the date and time.
 
„
T
[THE CLIP IS PROTECTED. PLEASE CANCEL 
PROTECTION.]
The clip is protected. Please release the protection.
[THE RECORDING IS STOPPED (OVER THE 
LIMITATION)]
Recording will stop. (Continuous recording for 12 
hours)
[THE TC MODE IS CHANGED TO "NDF"]
NDF is selected as the TC mode setting.
[THIS BATTERY CANNOT BE USED.]
This battery cannot be used.
[THIS CARD CANNOT RECORD IN VIDEO 
MODE.]
This memory card cannot be used for video 
recording.
[THUMBNAIL DATA ERROR IS DETECTED.]
An error has been detected in the thumbnail 
information.
 
„
U
[UNABLE TO FORMAT.]
The memory card cannot be formatted.
 
„
W
[WRITE PROTECT]
This memory card is write-protected.
Error displays
The following messages are displayed when an 
error has occurred in the camera or the memory 
card. If the problem is not solved by switching the 
power off and back on again, either change the 
memory card in accordance with the instructions 
displayed, or consult your dealer.
 
„
E
[ERROR OCCURRED. PLEASE TURN POWER 
OFF.]
Displayed when an error has occurred on the 
camera. Turn off the power.
 
„
R
[REC WARNING]
Displayed when an error has occurred during 
recording. Start the recording again. If the warning 
appears again, consult your dealer.
 
Switch the power off if the warning continues 
to appear.
 
Try inserting a different memory card if 
the warning appears again after restarting 
recording.
 
„
S
[SYSTEM ERROR TURN POWER OFF]
Displayed when an error has occurred in the 
system. Switch off the power and back on again.
 
If this error is displayed when accessing the 
memory card, such as when deleting a clip, 
the memory card may be damaged. Please 
replace it with a new memory card.
 
If this error is displayed during repair, please 
use the AVCCAM Restorer contents repair 
software. (Page 16)