Sharp VL-NZ100S Benutzerhandbuch
Useful Features
Useful Features
Camera Recording
Camera Recording
33
Still Recording on Tape
Available mode:
TAPE-CAMERA
You can record continuous still images of
subjects.
subjects.
1
Set the camcorder to TAPE-CAMERA
mode.
mode.
2
In Recording Standby mode,
press the STILL button fully.
press the STILL button fully.
• A still image of the subject is
displayed.
3
Press the REC START/
STOP button.
STOP button.
• The still image of the
subject will be recorded.
To pause recording
Press the REC START/STOP button.
To cancel the still image
Press the STILL button fully.
Notes:
• Still Recording can also be used during
• Still Recording can also be used during
recording by pressing the STILL button fully.
• The picture quality in Still Recording function will
be slightly lower than normal pictures.
Attaching the Supplied
Tripod Adapter
Tripod Adapter
Attach the supplied tripod adapter when using
a tripod with the camcorder.
a tripod with the camcorder.
1
Align the tripod adapter with the tripod
adapter socket on the bottom of the
camcorder, then rotate as shown below.
adapter socket on the bottom of the
camcorder, then rotate as shown below.
2
Attach tripod to tripod socket.
Note:
• You cannot use the supplied tripod adapter, if
• You cannot use the supplied tripod adapter, if
the alignment pin is not retractable.
Tripod socket
Tripod adapter socket
VL-NZ100H-031-037
02.2.14, 10:00 AM
33