Panasonic KX-TVP200 Benutzerhandbuch
5.4 AUTOMATED ATTENDANT PARAMETERS
Installation Manual
127
5.4.3
Operator’s Parameters
If you enable operator service, you must set the following parameters: Operator’s Extension
and Mailbox Number, Coverage Modes, and Message Repeat Cycle.
and Mailbox Number, Coverage Modes, and Message Repeat Cycle.
Operator 1:
The default is set at "0" which coincides with the operator of the PBX. When a caller tries
to leave a message for Operator 1, the message will automatically go to the General
Delivery Mailbox (GDM) by default.
to leave a message for Operator 1, the message will automatically go to the General
Delivery Mailbox (GDM) by default.
Operators 2 and 3:
For KX-TD500, KX-TD816, KX-TD1232 and KX-TD612, Operators 2 and 3 can be
assigned to a floating number that is assigned to a ring group.
assigned to a floating number that is assigned to a ring group.
Return to Program-Service Setting-Auto. Attn. Setting Menu:
Enter the data using the table below as a guide. The table below is for Operator 1 as an
example. Please refer to it for Operators 2 and 3.
example. Please refer to it for Operators 2 and 3.
Table 5-6
Description
Value Range
(Default)
Description/Function
Operator
Service
Service
1. Disable
2. Enable
(Enable)
Enables or disables the Operator Service feature.
[Note]
•
All non-touchtone input calls in Automated
Attendant Service will be transferred to the
General Delivery Mailbox when the Operator
Service is disabled.
Attendant Service will be transferred to the
General Delivery Mailbox when the Operator
Service is disabled.
Enter The Number : = 2
Program - Service Setting - Auto. Attn. Setting - Operator's Parameters Menu
1. Day Mode
2. Night Mode
3. Lunch Mode
4. Break Mode
SELECT ITEM AND PRESS KEY
1. Day Mode
2. Night Mode
3. Lunch Mode
4. Break Mode
SELECT ITEM AND PRESS KEY
1. Operator 1
2. Operator 2
3. Operator 3
SELECT ITEM AND PRESS KEY
2. Operator 2
3. Operator 3
SELECT ITEM AND PRESS KEY