Panasonic KX-TVP200 Benutzerhandbuch
7.2 UTILITY COMMANDS
158
Installation Manual
Note
Type CCLR 0 to clear the access counters of all Custom Services.
7.2.13 Message Waiting Lamp Retry Times (MWL)
Use the MWL command to specify the number of times the VPS will attempt to turn on the
Message Waiting Lamp of the called extension. Apply this setting when a PBX other than the
Panasonic KX-T series telephone system is used.
Message Waiting Lamp of the called extension. Apply this setting when a PBX other than the
Panasonic KX-T series telephone system is used.
Note
This setting is not valid if "Message Waiting Lamp for Every Message" is set to "Yes".
7.2.14 Setting Minimum Recording Length (MRL)
Use the MRL command to specify the minimum message recording length (0-3 s). Messages
shorter than the specified minimum recording length are discarded from the mailbox.
shorter than the specified minimum recording length are discarded from the mailbox.
Note
The minimum recording length can only be set using this command.
1.
Type MRL, then Press RETURN.
2.
Type the message length.
7.2.15 Modified Prompt List (MPLT)
Use the MPLT command to display the user prompt recording status: recorded, not recorded,
or turned off.
or turned off.
1.
Type MPLT, then Press RETURN.
MPLT —> both prompts
MPLT 1 —> User 1 prompts
MPLT 2 —> User 2 prompts
$ CCLR 20
Custom Menu <20> Access Counter Cleared !!
Custom Menu <20> Access Counter Cleared !!
$ MWL
Current Setting of M.W.L. Retry Count is 3
Enter M.W.L. Retry Count (1-3) =
Current Setting of M.W.L. Retry Count is 3
Enter M.W.L. Retry Count (1-3) =
$ MRL
Current Setting of Minimum Recording Length is 2
Enter Minimum Recording Length (0-3) =
Current Setting of Minimum Recording Length is 2
Enter Minimum Recording Length (0-3) =