Panasonic KX-TVP200 Benutzerhandbuch
B2 SYSTEM ADMINISTRATION—MAILBOXES
212
Installation Manual
Notification Setting
Follow the procedure below to set the parameters for the Message Waiting Notification Device
feature. A maximum of 3 destinations (Device 1, 2, 3) can be specified per mailbox.
feature. A maximum of 3 destinations (Device 1, 2, 3) can be specified per mailbox.
•
Class of Service programming determines if the subscriber is able to use this feature.
•
If the destination device is a telephone, the subscriber will be called when he has
message(s), and will have a chance to listen to the message(s).
message(s), and will have a chance to listen to the message(s).
•
If the destination device is a beeper (pager), the subscriber will be notified when he has
message(s). If the beeper (pager) has a display, it is possible to send to it a callback
number. The caller can enter the callback number when he leaves a message. If he
does not enter a callback number, either the System Callback No., or the caller’s number
if it is received through a telephone company’s Caller ID service, will be sent instead.
message(s). If the beeper (pager) has a display, it is possible to send to it a callback
number. The caller can enter the callback number when he leaves a message. If he
does not enter a callback number, either the System Callback No., or the caller’s number
if it is received through a telephone company’s Caller ID service, will be sent instead.
Notification Setting-Device 1, 2, or 3
To access the proper menu for Message Waiting Notification, follow the menu path
as shown:
as shown:
System Administration Top Menu-1-1-1-Mailbox No.-2-Device No. 1, 2, or 3.
Table B-5
Parameter
Value Range
(Default)
Description/Function
Dial Number
Up to 32 digits
consisting of 1-9,
0, , #
P, T, M, X
(None)
Assigns a telephone or beeper (pager) number to
Device 1, 2, or 3. The subscriber can also specify the
dial number from his telephone.
Device 1, 2, or 3. The subscriber can also specify the
dial number from his telephone.
P: Pause
T: Dial Tone Detection
M: Dial Mode Switching Code (Touchtone to Pulse, or
Pulse to Touchtone)
Pulse to Touchtone)
X: Callback Number Entry Code
1-9, 0, , #: Dial Codes
Note: The callback number entry code "X" must be
included in the number to be called if the Beeper
Callback No. Entry Mode is enabled through COS and
"Type of Device" is set to "Beeper". The proper number
of "Pauses" must be inserted before the callback entry
code.
included in the number to be called if the Beeper
Callback No. Entry Mode is enabled through COS and
"Type of Device" is set to "Beeper". The proper number
of "Pauses" must be inserted before the callback entry
code.
Type of Device
1. Telephone
2. Beeper
(Telephone)
Specifies the device to receive notification. This is
automatically set to "Beeper" when "X" is used in the
Dial Number (above). The subscriber can also specify
the type of device from his telephone.
automatically set to "Beeper" when "X" is used in the
Dial Number (above). The subscriber can also specify
the type of device from his telephone.