Auerswald 2500 Benutzerhandbuch

Use of the Telephone and PBX System

Subscriber Function of the PBX

103

Switch on/off Do-not-Disturb

If you do not like to be called by anybody, you will be able to block your system telephone for
internal and external calls with the function “Do-not-Disturb service”. Then a caller will get the
busy signal. In case of emergency you can be reached with a priority call by an internal sub-
scriber. Of course you are able to make a call with your Do-not-Disturb protected telephone.

Use the Function via Function Menu:

Assign Key:

Use Function via Key:
By pressing the key Do-not-Disturb is switched on, off or over.

LED Signalling next to the Key:

Open the function menu for the function “Do-
not-Disturb” (You will find help on

page 33

and

the following).

functions

do-not-disturb

The icon

marks the current

setting.

Press the softkey to the left of the option
you require:

앫

activating: Switch on the Do-no-Disturb.

앫

switching off: Switch off the Do-no-Disturb.

...

Open the key programming menu for the func-
tion “Do-not-Disturb” (You will find help on

page 33

and the following).

define keys
function key ...
... level
do-not-disturb

The current settings for the key
assignment is shown on the
display.

If you like to change the current settings, press
the softkey in front of the corresponding
selection once or several times (You will find
help on

page 155

and the following):

앫

[switching type]: Enables the assignment
with switch on, off or over.

Press the

softkey to complete the settings.

yellow

The call protection is switched on.

off

The call protection is switched off.